Polymaker Break Away Support Material for 1.75mm PLA Filament, 0.75kg Spool - PolySupport 3D Printer Support Filament Easy Support Removal

I tried using this "support filament", it doesn't weld itself to the print. I set my slicer up so it only uses the support filament on the Support/Raft Interface. Meaning it only prints 2 layers (I use 3 Layers) between your support and the print. It lasts a very long time because of this, and works great. Great product, don't let the price scare you off, just do this and it uses very little material per print.

Not always perfect. The break away material needs a little effort to breakaway sometimes.

I really couldn't be more happy with the filament. I was originally considering soluble filament for supports but I didn't want to deal with dissolving supports all the time while prepping items. I'm running it on a Prusa MK3S+ with an MMU3 with the soluble interface profile on Prusa Slicer and it prints great without any extra tuning. The filament doesn't come off perfectly without some picking at it but the finish is much better than using supports with standard PLA. I'll definitely be using more of this filament in my print farm.

This Polymaker Break Away filament leaves a little bit to be desired. It is dimensionally accurate at 1.75mm in diameter it is within the specs and seems good quality on the roll. However it is a bit brittle and then print quality is mediocre, and that is with quite a bit of tuning. As it is a support material and not typically seen the color quality, while good is not all that important. The spool is well wound providing good tangle resistance.

Wow, it just simply works. PLA full contact support is a full go and removes so easy. I have used it with the Polymaker HT & HT GF PLA filaments and it provided a perfect bottom layer. Although they say it is ment for PLA only, I'll try it on other filaments just to see, but it does get quite liquid at higher temps so may be a bit tricky if you run it at higher temps. I used it as the support interface layers only instead of printing the entire support structure with it. I'm not sure why Polymaker says this filament WILL jam a filament swapping single printhead system? Except the stupid narrow spool (yes you should respool it on a standard size spool), it worked flawless in my CFS. I'm sure it should work in an AMS and MMU just fine too. Polymaker, please put this on a standard size spool and it would be an easy 5 stars.

I use this product for nearly all of my PLA prints in my print farm. It cleanly breaks free with only the slightest amount needing removed by a pick. I use mine with a .2mm layer, leaving a nice finish behind.

These were requested Christmas gifts. He is into ai and was happy to get them.

no issues with humidity and prints well

👍

Fantastic product. Wish it was cheaper since you throw it all away

Dit is echte goede support voor mijn PrusaXL. Ik heb allerlei support geprobeerd en bleef problemen ondervinden dat geheel zwevende objecten niet vast bleven zitten of dat support niet los te krijgen was. Met dit support kan ik complexe support structuren maken en krijg het wel goed los als ik op de top 0.2mm afstand houd.

Provato su diversi progetti e ho avuto un ottimo risultato

Ottimo prodotto. Soldi ben spesi. Il pezzo si stacca benissimo dal supporto.