Grommet Tool Kit Eyelet Plier: IMLIKE Handheld Puncher Set with 500pcs 3/8 inch (10mm) Silver Grommets, Manual Eyelet Kits Press Machine for Banner

Very pleased with this grommet tool. I used it to add grommets to a sail, and it worked very well. Easy to use, and nicely finished result. It was necessary to first punch the sail material with the hole punch supplied with the tool, but that was easy enough and went well.

Solid product that works as it should.

This tool saved me a TON of money during a campaign--the large 3'x3' plastic signs and the canvas banners had a surcharge to add grommets. This tool was a fraction of the cost, and I could place the grommets where I wanted them. It was also easy to replace them if one ripped out. I have also used it to put grommets in tents, tarps, and all sorts of fabric. Very handy to have!

Love it. Perfect size. Good for the money. Work great for me. Work great on paper banners

So I have had a chance to try this tool out a couple of times now with a couple of different materials. I am so far finding it is working great! The Magnectic holders for the Grommets is actually so much more useful then I thought it would be. When they are in they stay right where they need to be. (However if you put the flatish one on backwards it can be tricky to get back off.) Keep in mind though that the magnets don't help for brass or aluminum grommets as they are non Non-magnetic. (And it might not work for some high carbon steel grommets either for the same reason.) The tool itself can punch through most materials with ease without precutting like thick cardboards or thin plastics. Making adding grommets to these materials a breeze. However Thicker or Tougher materials like leather or rubbers will likely need to be pre punched first before adding the Grommet. Good thing is there is a hole punch added in with this kit that will serve you well in doing just that! Although... Admittedly it isn't an amazing one. The edge was kinda dull and right out of the box I noticed a bad chipped edge on the blade. It will still work as intended with a swift hammer tap (Not twisting like I do in my video) to cut holes on most things but don't expect it to be of a miraculous quality is all. Still, it is more then serviceable and nice to have. Speaking of other nice to haves, sadly this Grommet terminator is not ratcheting. It doesn't take much force to use so I understand why it isn't, but racheting tools are nice to have as they typically release automatically after the right amount of force is applied. Again this tool doesn't do this, you just squeeze hard and hope it is enough. It does mean a lot of wasted energy which doesn't matter for a Grommet or two, but over dozens or hundreds the extra effort might really wear your hands out. Just something good to keep in mind... Anyways so onto the 500 Grommets thing. I am always a little Dubious of counts like these on products and can't help but test them. In this case counting individually would be too time consuming so I used weight. Weighing up 10 of each part and using that number divided into the total weight of the parts and then multipled by 10 to give an approximate total. My results were: -Flat Halfs: 112.1g (Total weight) / 2.2g (Weight of 10 Pieces) = 50.95units x 10 (Conversion back into singles) = 509.5 (Approximate) Flat parts. -Other Half: 220.6g / 4.3g = 51.30 x 10 = 513 (Approximate) other parts. So the bag should include the pieces to make the 500 grommets like it says. And actually a couple more. Though according to my math the amounts might not match up perfectly acoss the two parts. (You might end up with a couple more of one or the other.) I expect up to maybe a 5 part + or - margin of error with my methodology. But still you should get you the 500 promised from what I see. (I posted pictures of the Weighing and math if you wish to look yourself too.) I have also included a picture next to a USD dime for scale. And the instructions included as a backup for anyone that might of lost them. Though it is so simple it is likely they are not needed after using the tool the first time. In summary the tool is solid feeling and works well. The count of pieces it includes does seem to be right. But the punch that it comes with isn't the best. (Though still works decently for what it is supposed to.) Thank you for reading, hopefully it helps!

Clamps grommet together easily and cleanly, and cuts trough material for the hole.

So easy to use!!! I got this to use this for my classroom backdrops because tape wasn’t always working. I expected this may or may not work because I wasn’t sure how easy it would be to get it through the fabric. My coteacher and I actually cracked up after doing the first grommet - it took almost no strength to press and it was all set! It didn’t bunch the fabric around the grommet (I was worried about that too) so the picture stayed pristine. I love that the grommet holder is magnetic so the pieces click right in and it comes with so many I’ll be set for a while. I’m excited to use this on all of my backdrops and make hanging them with hooks so much better! Makes me wish I had more things to use it on!!! Highly recommend!

I bought this device to put grommets in some fabric for outdoor curtains. I checked multiple times to make sure it said it worked on fabric, then when it arrived it said right on the instructions it was not for fabric. I attempted it anyway and it didn’t punch all the way through very thin cotton fabric, and it puckered around the grommet. I was disappointed. But overall it was very easy to use and did great on the cardboard box I practiced on. Ultimately, I would not recommend it for any fabric type material despite it being advertised for it.

Solid and work's well, as descrived.

ブルーシートにハトメを取り付けるため購入しました。穴開けも同時にできて性能も申し分ないです。ゴムバンドで車の荷台に張っていますが、しばらく使用してハトメが破れることもありません。

Excelente calidad

Excelente!

シートの補修で購入しましたが今の所、本当に良い商品だと思います。