Just Mobile Headstand for Heaphones with Headband (HS-100)

The HeadStand is a simple product with a simple purpose: keeping your headphones tidy and at the ready, while at the same time showcasing them with class. The quality is top notch, with precise aluminum parts that especially complement Apple products. The stand feels very solid once assembled, and the bottom rubber pad keeps it from sliding around or scratching surfaces. There's not much else to say--it's basically a glorified hook. But it's certainly one of the better-looking headphone stands available, and it isn't even the most expensive one out there. One minor thing to keep in mind is that if your headphones use a coiled cable, you won't be able to wrap it around the base. The spacing between the plates is just 5/16", so only straight cords will fit. However, the hook is large enough that coiled cables can be hung over it alongside the headphones. I use my stand with a pair of Sony MDR-V6s which have a coiled cable, and the setup looks fine.

This is an exceptionally well-made stand that should last for years. It provides generous headband space at the top and useful cord management at the base. A rubber material covers the entire bottom of the base, so it will be sturdy on most surfaces. Some have complained that this stand is too short, but it really should fit a large majority of over-the-ear headphones. You have about 8.5 inches of breathing room between the base and hangar. There are obviously less-expensive stands out there, but the Just Mobile HeadStand's quality and functionality are well worth it.

I got this to hang up my Bose earphones when I'm not using them (more convenient than spending time putting them back in their nylon case). It has a smaller footprint on the computer desk and gets them out of the way, but they are still readily available for use. I wish they had designed a little basket or something on the back to hold the earphone cord and plug, but it is still a good idea and the design fits in with the aluminum look of my computer and accessories.

Im gonna start this review by stating that I did read a few reviews here that say its over priced, yes, the idea of something holding your headphones for 50 dollars may sound much, but lets be honest here , not everyone buys headphones that cost less than this stand. I dont have the most expensive headphones or anything either, but for me , its all about the look. I function better with a clean environment and this product does more than just clean, its made with such precision and looks absolutely stunning.. And its not so much about what the product is, but the craftsmanship that went into such a product, and once you open this up, youll be perfectly fine having spent 50 dollars. Even the way it is packaged is great... People need to understand that all these things cost money, if someone was making these in his basement i would still pay the asking price just because of how well it is made, but there are a lot of costs in manufacturing something of this quality... I would recommend this to anyone and Just Mobile has now officially made it on to my list of companies to watch out for.. They have some very interesting prodcuts that I cant wait to save up for and buy..I just wish they did more for other companies as well and not just make things for apple products... In the end all i can say is that everyone who has seen this headphone stand has given me compliments for it. and that says a lot... I love this product, and cant find a single fault.

Looks good and does the job. Every few weeks I have to screw the screws in again due to them becoming loose. It's very expensive to have a flaw like this.

Fantastic addition to my Beats Studio Wireless 2.0 headphones. Perfect fit with room to spare. Quality parts and easy assembly. The weight distribution is perfect and the headphones are secure when resting. The gap at the base is a nice place to wrap and store the USB charging cable when the headphones are in use. Update 1/5/17: Screws to hold the stand stripped by September. Was trashed in October.

Bad: If your headphones are as large as or larger than the Sennheiser HD-600s, this stand won't work for you. They won't fit without removing the cables and retracting the ear cups all the way into the headband, if they can fit at all. The spindle at the base of the stand meant for winding your cord around is extremely slender, and is ill-suited for anything less than 5 meters of cable (and less flexible cable which may become warped or damaged from being wound tightly). Additionally, the space between each plate is narrow enough that some headphone cables must be forced over themselves each winding. Good: However mediocre the design, the build quality and aesthetics of the product are good. The entire bottom of the base is covered by one large rubber pad, so wobble and slip are non-issues.The base is also well-weighted. Assembly is easy and can be done with a Phillips head screwdriver.

The headset or headphone stand is very sturdy and well made. You can put some heavy headsets on this thing and it will not bend, break, or be over powered like cheaper stands. As the base is just the right weight and the band holder is quiet strong. Upon putting the stand together I even applied a bit more force than a headset/phones would put on the stand to not even see it bend. Just Mobile did right by the cable management on the base, it's just awesome. You can run quiet a bit of cord through this and still have room. More so if you are not feeding a larger cable through it. However, on one of my PC headsets I have both a USB sized cable & a smaller micro usb cable wrapped around this thing, with a few extra bits of space. Another grand thing for cable management is the fact the band holders frame is split into two. On my second Just Mobile stand, it allowed me to sit one of my headsets sound card/controller, on the stands base while feeding the cable through the split frame. Allowing me to not have that awkward controller past stand or before stand bit. As it is just seamlessly right on the stand, to not have any tug or knocking the stand over.

Ich habe lange nach einem Kopfhörerständer gesucht und wollte mir schon irgend einen Glaskopf kaufen. Doch dann bin ich auf dieses Produkt gestoßen. Der Preis ist für dieses Stück Blech zwar schon relativ hoch, aber bevor man noch lange weiter suchen muss und unglücklich ist, kauft man es eben trotzdem... Wie bereits in anderen Rezensionen beschrieben ist die Verpackung echt gut aufgemacht! Hier hätte man vielleicht ein paar Euro sparen können. Dennoch bringt es das Produkt noch mehr zur Geltung und man packt es auch gern aus. Der Kopfhörerständer an sich ist sehr edel und elegant. Das matte Schwarz fügt sich passend zu meinen Monitoren und Lautsprechern auf meinem Tisch sehr gut ein und sieht einfach nur schön aus! Der Kopfhörerständer ist schnell zusammengeschraubt und auf den Tisch gestellt. Die Grundplatte hat eine Dämpfung auf der Unterseite, was die qualitativ hochwertige Anmutung weiter verstärkt. Auch ist der Ständer schwer genug und steht fest auf dem Tisch. Für mein Headset könnte er nur etwas höher ausfallen. Das sollte aber für Standardkopfhörer durchaus ausreichend sein! Klare Kaufempfehlung!

For me this is quite an expensive headphone stand, even if it is made of metal as there are quite a lot of other headphones stands out there that are cheaper. However I don't think any look as good as this, the black metal finish really fits into a clean and elegant work station. The build quality is pretty good, although had a little movement in the main stem of the stand but extra tightening the screws sort of solved this. The only niggle I have is they are causing indentations on my Razer Tiamat 7.1 headband, which isn't the biggest issue in the world and to be far this is more a niggle with the headset for using pockets of padding instead of one piece of padding. But overall I recommend this to anyone who wants a elegant, classy, neat and well built headphone stand.

Well. It's an aluminum stand to hold your headphones/headset. It does just that. Feels very sturdy and doesn't slide around at all. Regarding it being too short for some headphones, all I can say is I've got a Steelseries H wireless headset hanging on it and there's plenty of clearance room, so it suits me just fine. Is it worth $50? probably not, but considering all the other stands I searched for (ebay) looked really cheap and were shipping from overseas, it's not too astronomical. Will it last forever? Most likely. Does it do what it is supposed to do and look nice doing it? Yep.

Que dire mise à part "MAGNIFIQUE" produit de belles finitions je le recommande ! Je l'utilise pour mon casque Senheiser pc350

I now have two of these. I have a set of Sennheiser PC363D for work computer and a Beyerdynamics MMX300 on my desktop gaming computer. Both fit with ample room at the base. Assembly was simple and can be taken down if you have to pack it away. The finish is great. I picked up one first for my gaming station but realized how much room that they saved on my desk so re-ordered soon after I was using the first one.