Brother Color Laser Printer, White Multifunction Printer, White, MFC-L8610CDW, Wireless Networking, Automatic Duplex Printing, Mobile Printing and Scanning, Works with Alexa

I'm posting this as a preliminary review, since I have only owned this printer/scanner/FAX for a few weeks. I'll post a followup once I've had it long enough to put it through its paces, see how often jams happen (and how difficult they are to clear), see if any other usability or maintenance issues arise, and see how long the supplies last. INITIAL IMPRESSIONS: First of all, this model seems to be VERY NEW, so much so that Amazon Dash Replenishment hasn't been integrated yet -- though Brother promises that it will be soon. Nevertheless, there was a firmware update available when I finished configuring the device. Also, for a SOHO or small-workgroup printer, it is BIG and HEAVY, though relatively quiet. You WILL want two people to lift it out of the crate, which is of the same kind that heavy servers are shipped in: removing four retaining clips allows the box (top 90%) to be lifted straight off the base (bottom 10%), in order to get hands under the device easily. Other than this the heavy lift, basic setup was a breeze. In terms of hardware, there were a lot of tape, clips, and other protection to remove, but instructions point out the location of each. Despite the plastic exterior chassis, the build quality was very high. For example, the pull-out tray (actually the drum unit) containing the toner cartridges, and providing easy access to the other replaceable components, is one of the cleanest designs I've seen outside of datacenter equipment. Additionally, the various trays, flaps, rollers, and access doors involved in the printing and scanning paper paths move smoothly and engage/disengage with a positive audible and tactile "click". In terms of software, one of the biggest pains in the neck for new devices is usually joining the local WiFi. Here, Brother made the process easy, in the same way the Google does with their Chromecasts: the device advertises a peer-to-peer WiFi network which the manufacturer's software can use to connect to the device and upload the correct network settings from the computer. After that, local install of drivers etc, was fairly painless. And that's as far as most SOHO users need to go. For those with more complex requirements, it is worth noting that in almost every instance Brother did The Right Thing with the firmware on this device. For example, EVERYTHING can be configured through an embedded webserver, which also supports HTTPS, and allows the admin to create and upload REAL certificates if they choose. It supports just about every local and remote printing protocol imaginable, from the old BSD lpd protocols to AirPrint and Google Cloud Print, and everything in between, along with a full suite of file-transfer and network management protocols... all individually disableable, of course. The WiFi can operate in the "personal" (same password for everyone) or "enterprise" (EAP) modes, and IPV6 is supported but can be disabled. The device can update its own firmware over the network, and the process was basically painless. It was great to see a multi-function laser printer that was as easy to set up as a consumer device (and easier than many cheap inkjets) while having the configuration flexibility, protocol flexibility, and "enterprise" options to meet the needs of a more secure (or more complicated) network environment. In terms of the desktop software, I have only tried the MacOS version. They got the job done, but were not actually as polished as the printer's firmware. For example, the network-install wizard, which connects to the printer's ad-hoc WiFi network to transfer WiFi credentials and parameters, claimed to have failed with a timeout, despite having successfully configured the printer's network interface. The rest of the computer-side install worked well, and it was nice to see that the print drivers use CUPS rather than some weird proprietary interface. The only other gotcha was in the Control Center application, setting up the presets for scanning. This application controls the presets (for example, resolution, file format, destination directory) both for "pull" scanning (initiated by the computer) and "push" scanning (initiated by the printer), but it was difficult to figure out how to configure the latter. The program provides buttons for "Image", "OCR" (which is integrated, fast, and reasonably accurate), "email" and "file", but clicking these configures (and initiates) a "pull" scan. A net nearch revealed that to configure the presents for "push" scanning, in is necessary to hold the "control" key while clicking one of these buttons.. this worked fine, but was counterintuitive and not well documented. These were really the only troubles with the MacOS desktop software. Again, I can't comment on the Windows software as I haven't used it, but the MacOS software has all the necessary features, and gets the job done. It just lacks the level of user-friendliness and polish that I would expect given both the excellent firmware on the device and the high build quality. OVERALL ASSESSMENT: Brother did a really good job with this device, especially for less than $500. The model seems very new, with room to improve via software and firmware updates. I hope that future versions of the MacOS desktop software will smooth out some of the rough edges, and future versions of the device firmware will integrate Amazon Dash Replenishment as well as additional web services for print sources and scan targets.

Replaced a consumer grade "all in one" brother color laser that needed new drums. This is a higher volume small business grade printer. Comes with enough toner to print 3k pages so it was almost a wash compared to just getting all OEM consumables for the older printer. Works fine. Has a multi page source doc feeder for single sided copies. It can scan to USB, or mail a scan as an attachment. The only minor gripe, the wireless N does not support the 5ghz band. It is large and heavy, needed 2 people to unpack. The previous Brother model lasted us 4 years w several toner refills and one set of new cartridges. Update : The factory toner in this new printer did run out in 9 months (2-3k pages). Note that the page rating given is typically at 5% coverage which is not realistic. (your actual coverage will be vary between 5-20%). Given that, I think the factory cartridges did pretty good. Update2: We had this printer now for 28 months, using it as a copier and a scanner as well. (Scan to USB stick ). Replaced cartridges with aftermarket ones, and refilled some of these, and the printer is still going strong, no failures of any kind, print quality looks good. Maybe the aftermarket black is not quite as black as the OEM, but good enough for me. Per the page counter, we have printed 11K pages so far, 3k copies. All parts report 86-96% life left. I highly recommend this printer. Well though out, functional, and proven to be reliable for us. Replacement drums are pretty inexpensive for this model, so when those wear out, I will probably replace the drums unless a more compelling, similar model comes out by then. I expect to get another 2-4 years out of it.

Have owned for about 1yr. My specific use case is for color printing manuscripts which allows me to read anywhere without the need for electronics. I am very satisfied with this purchase. Very fast, double sided color prints and wireless. I can print from my phone using the app, which can be a little slow when printing large pdf files (~20Mb). I highly value reading ink on paper. I can quickly print 2-4 hours worth of reading materials in a few minutes and have a very relaxing reading period without a laptop or a tablet. Just note that it needs to cool off for 5-10 minutes every 50-80 (double sided) pages printed sequentially. When comparing the 80th page vs the 1st page It looks as if the prints start to lose contrast but are still legible. I use ink owl's refills available through amazon. I still have the original cartridges and have refilled them twice now - three times for the black toner. See ink owls videos for how to refill cartridges and reset the toner level indicator. *Be warned that this voids warranty* I think it is worth it after one refill. I have spent 250 on refills, but saved about 1000. The inkOwl items on Amazon or inkOwl site are PUN-8438 (caps to reseal cartridges), TBR-436-CMYK (CMYK refill toner), TBR-433-G4 (the reset gear for the cartridges that come with a newly purchased printer). The included brother cartridge is high quality plastic with metal parts - better quality than many car parts. These are not "disposable" items. It is a sturdy container with a roller and gears. It will last for hundreds of refills. Be very careful when refilling. Make sure you lay out a large plastic sheet, use gloves, a mask and clothing that you don't mind getting stained. Also make sure your AC/fans are tuned off. I spilled a little of the toner and stained my rug, my wooden floor and some tools. It kind of comes off with cold water, but it is a hassle. Just take your time and avoid squeezing out the toner, let gravity do the work.

Wonderful if you need a mediocre business product. It prints forms and documents well. However, it doesn't: Scan duplex pages; Fix skewed forms; Easily connect to my network; Clearly explain these deficiencies. Last Brother product I'll buy.

Does everything I need it to, but falls short on double-sided (duplex) scanning and the printer scanning options don't play very well with my MacBook Pro. I can put the docs to be scanned in the auto-feed tray, but then I must initiate the scanning on my Mac, it won't connect to my laptop from the printer touch-screen scan option. I can get it to work here and there, but mostly it won't scan unless I open the Brother Control Center in my dock and tell it to scan from there. I had this issue with my older Brother laser and multi-function printers as well. It must be an issue with Brother. The machine is a little slow to print initially, but once it's printing it's quick. However, waiting for it to receive the WiFi communication seems to take longer than it should. That being said I had previously bought an HP, which was promptly returned because they do not play well with Mac. I wish the paper tray held more paper. The print quality is great for a color laser printer and the functionality is acceptable for my small home office.

This is a great multifunction printer/copier/scanner. I don't like inkjet machines because they are constantly coughing, the ink tends to run and the ink is expensive. This printer runs on color toner so no matter how long it did unused, it always works first time. I found the printing speed to be much faster than my previous color printers. It's almost as fast as my previous high speed brother black printer. The colors are reasonably true. Installation was much simpler than the hp MFC printer it replaced and connecting to my cell phones was a breeze. It is very quiet, I sometimes think it failed because I couldn't hear it printing from another room.

I've had Brother printers since the first HP laserjet copies (HL-6) and have liked the performance and value. But its always been Parallel (days before the wheel), USB or ethernet. Never had good results on wireless. This beast actually has great wireless set up tools (wizard and drivers). Even my kids are able to connect to it ( I call these two the bluescreen twins so that gives you an idea if they can do it, anyone can). Print quality is good. Its reasonably fast, although time to first page is a bit slow. Plus the scan and fax functions work well (finally). Yes some people still use fax- if you need to support them, this one is a good choice. Built in duplex also for those mega doc jobs. Its big, its heavy, it will take up the space in your home office. But its a reasonable tradeoff if you need these specific features and capabilities. I should also say packaging was excellent! Very solid.

Update: 3-4-2020 Great printer. This beats the Dell printer I had hands down. Works great even if I leave town for a few months, without the cartridges going stale, or getting quirky. Brother ROCKS !! would buy again in a heartbeat. Software seems to be trash, what a hassle. Will try tech support. I actually had to remove all other printers, then took forever to install on my computer. Trying to install the driver on my wifes computer...what a hassle..JUNK WARE !!! Update 10-25-18...I love this printer. Had issues at first...hence my shall we say "venting" but this little jewel has been a "pleasure" to use. Brother upgrades their Firmware occasionally I purchased a Dell printer (2155) years ago and was "NEVER" happy with that printer. I will always "buy Brother printers", and "avoid Dell printers" from now on.

Recomendo, entrega super rápida.

Best Printer that I could have ever gotten.

I'm very happy with my new printer. It's very easy to set up and to use.

Chegou antes do previsto. Atende super bem e tem ótima qualidade de impressão. Fácil conexão via wifi.

Great printer.