34 Pict-3 Carburetor For VW Beetles Super Beetles 1971-1979 Dual Port 1600cc Air Cooled Type 12V Engine Electric Choke Volkswagen Bug Bus Thing Karmann Ghia Squareback Transporter #113129031K

Really impressed with this little carburetor. Bolted on right out of the box and it runs perfectly. GREAT VALUE AND CARB. Definitely recommend!

It cured my idle circuit problem of rough/no idle and the flat spot when accelerating. I ordered it from Amazon last night at 6 PM and they delivered it this morning at 4 AM. I inspected inside the bowl and everything was good to go. I left the 127 main jet and the 55 idle jet as received and did not change to the extra 137 main and 60 mm idle jets. I fine tuned the idle air/fuel mixture (smaller screw on driver side of carb) and then set the idle at 900 RPM using the bigger screw. Then I also set the choke/idle screw to match the RPM I had set before using the bigger screw on the driver side. Then I set the SVDA distributor timing at 30 degrees at 3000 RPM with the vacuum advance disconnected (with a piece of tape over the end of the port on the card to prevent a vacumn leak). After timing, I removed the tape and connected the vacumn advance hose to the carb vacumn port. Runs great now!

Worked perfectly for my 1968 VW Bug. I was concerned about the cheaper price point but it is doing the dog well!

Carb for Super beetle, easy install, made minor adjustment and it runs great. Solid idle and good acceleration. Hope it lasts but for now really happy.

My old carb on my 1600 was running ok but I wanted to rebuild it and this thing was almost the same price. I see and have heard a lot of folks throw these on without adjustment. Well mine got 4 stars because it was pretty far out of adjustment. Oh it ran alright, but I had to turn in the choke idle adjustment to get it to idle which these are not designed for that. General internet lore all over say 2.5 on both side screws on the left side after you lightly bottom them out, then fine tune from there. My bottom smaller screw was like 1 turn out and my big boy screw was 2. Once at 2.5 each I could back off the choke idle adjustment on the top of the back of the carb, which most people probable use to make it idle. That thing is only supposed to touch and then 1/4 of a turn after the car is completely warmed up. Mine now idles at 850, even with the base settings of 2.5. Now mine is running a little warm which was the same as the old carb, which looks like one of these that's 10 years old. This is where crucial information is missing and I am going to provided, with pictures! It has a 127 main/55 idle installed just like my other carb. It comes with an extra 137/60 jets. The 60 ran awful and with the 127 my car was running hot, 137/55 runs pretty good but is really rich, the temps better but still 229 ish. Now I came to realize in all this that the top down on the vert ,the rain guard, combined with chrome tins was a losing battle. Took off the rain guard and popped the trunk, temps came way down at around 205. So I ordered solex/mukini jets for 10 bucks and I am going to run a 130 now. Probably what it should have came with as an extra as 127 to 137 is a lot. From what I have read in the charts online California came with 127 back in the day which is probably a tad lean for emissions. Do your own research, it is amazing I drove one of these as a kid, pre internet, and all the things I didn't know that I am learning!

It’s a great value to replace a worn out carburetor. I was chasing idle issues on my old carburetor. Ended up being a worn throttle shaft from many years of use. I unboxed this one, and installed. When I turned the key it started quickly. After some minor adjustments to the mixture screws it was running smoothly. It’s also a nice looking unit. Even came with a filter. Time will tell on the longevity, but I won’t be running ethanol fuel.

We had a car that sat for a long time. We installed this carburetor in it. It worked wonderful after cleaning out the fuel tank and line

I had pretty low expectations for this carb, but boy was I surprised! This thing worked great, straight out of the box. Very minimal adjustment and it was up and running with easy starts and no bogging. Highly recommend.

.

The carbuerator came well packed in box . It is important that explain that I am a retired ford engine fault nianostic engineer and have a excelled in this field. The item is high quality and has delt with common T2 bay carbuerator fault like venture air flow at high speed also giving you the buyer the option of self jetting the main jet system to your SEP thank Amazon for making my day.

LLEGO ANTES DE LO PROMETIDO, PERFECTAMENTE EMPACADO. LO COMPRE PORQUE CADA VEZ ES MÁS DIFICIL ENCONTRAR REFACCIONES DE CALIDAD PARA EL VW. ES IGUAL A COMO LO MUESTRA LA PUBLICIDAD. POR EL MOMENTO SE QUEDARÁ DE REFACCIÓN. DURANTE LOS 54 AÑOS DE LA VIDA DE VW HE COMPRADO MUCHOS CARBURADORES Y ÉSTE ESTÁ A LA ALTURA DE TODOS ELLOS.

Bon produit

Lo instale en un vocho recién reparado. Funcionando excelente a 2 meses.