Touch Lamp Switch 2 Pack, Touch Control Module, Lamp Switch Replacement

I have a pair of old whimsical monkey sconces that have been in a closet for some time. I finally got my renovations done and had the perfect spot for them in my home. Unfortunately, I was not able to do the preferred in-wall wiring due to plumbing within the wall behind them. So, I had to opt for plug-in wiring. That's fine, and I will be covering up the wiring with some paintable wall channeling. I decided I did NOT want to have an inline switch, so touch controls were my best and most logical choice. These modules are EXACTLY what I needed. The size and dimensions were perfect as well, because I had a limited area where they would be installed. The assembly and installation was a breeze. The instructions are very clear and easy to understand. I had no issues and the process for both sconces only took about 20 minutes. The end results are great. I just touch the metal tubes of the arms that hold the lamps and the modules control the lighting. I found the perfect LED bulbs to complete the project. I highly recommend these modules. They add a professional and novel 'touch' to any light/lamp that has metal on it.

Perfect. Exactly as advertised. This dimmer works exactly like the broken one it replaced. Have used it daily for more than a month and love it. The installation was just as explained in the wiring diagram. Note to novices. If you're not experienced or comfortable working with AC electrical, this control module is not for you. The time it takes for you to replace the old one (if that's what you are planning on doing) will vary. Because my setup also had a AC socket and USB charging ports it made things more complicated - lots of wires to deal with - but that's not due to this dimmer module. If this was the only thing in the circuit, it would have been a lot faster. Suggestion, don't attempt to install this unless you are comfortable replacing things like wall sockets and light switches. And read the wiring diagram carefully, check with a volt meter, and don't rely on the wire color coding alone.

The unit only worked for a few minutes, then it failed to dim the lamp and it wouldn't turn the lamp off, had to use the switch on the lamp. Typical of cheap Chinese stuff, the customer is the final quality inspector.

Buy the two pack. I blew the first one out by wiring it wrong. The second one worjked like a charm. Yes, the wiring diagram is on each part. No, I did not look at it first!

These switches come in a 2 pack thankfully. The first switch was dead right out of the box but the second switch works perfect. I contacted Amazon and they promptly replaced the bad switch. The lamp has gone through a month of being turned on and off with no issues. I do recommend these switches. Amazon, thanks for the great customer service on the replacement switch!

Good product

Worked perfectly! Just as expected.

I had a great touch lamp from a thrift store. It's fairly old. In a lightning storm that took out quite a few electronics around the home, said lamp was a casualty. I know the lamp is fairly old, only by the circuitry of it's original touch switch. Big fat old school through hole soldering, solid and effective. This swap was easy enough. I've had to dock some stars here though, because this switch is substantially less responsive. I almost always have to repeatedly touch and or rub this lamp to turn it on. Interestingly, this is only after a period of being off. Once it's going, it's perfectly responsive. But that's not really helpful. The original switch of visibly older circuitry, (really looks like a board from the 80's, maybe even late 70's) didn't do this. One touch, on. So, this does technically function, but not as well as a 40 year old touch lamp should.

Muy bueno fácil de instalar diagrama muy bien explicado te da 3 diferentes iluminaciones baja media y alta

Didn't work

Worst product, not working at all

Fue un simple reemplazo de partes que no requirió mucho tiempo. Funciona como se espera y vale la pena tener uno de repuesto en caso de tener este tipo de lámparas.

es adecuado para lámparas donde el interruptor es tipo táctil, son 2 interruptores independientes y cada uno tiene lo necesario para su alambrado