Rancilio Silvia (V1/V2) Steam Wand

This works with the Delonghi EC260BK (the machine i have). There was only one video of how to do this mod for the insulated hose machines. I noticed there isn’t a lot of information about how to add the rancillo steam wand to the EC260BK version specifically. Though it is definitely doable. In fact the EC260BK, seems to be the easiest of the stilosa family to work with as it doesn’t really require you to even remove the screws on the boiler. If you’re doing this on the EC260BK, just make sure your screw drivers are long AND thin enough. Use hot water and a hair dryer for get the plastic nut onto new wand. Get a spring hose clamp to attach the hose to the new wand (it’s worth the couple extra bucks) 5/16 worked for me though had to tighten down a decent amount. For those who are on the fence about it, I would say to do it. The Rancillo steam wand is a great upgrade, steams milk A LOT faster, has better power and is only a $20 upgrade. As other reviews mentioned, the wand does get pretty hot, and the milk dries a bit on the surface, but nothing a wet cloth can’t fix. Yes the process, may be a bit lengthy but if you’re into the hobby and have a bit of time on your hands it’s a fun way to spend a couple hours. The actual process is not hard in any way. So even if you aren’t very DIY, this is totally doable. It’s more or less about having the right tools, and once you learn the process it becomes a lot easier.

I used this to install on my Delongi Stilosa for the wand mod and it has been really good. It looks better and performs better. It was a little challenging to install but I got it done. I recommend it if you are looking for a better steam wand for a cheap great machine.

Revived the old $600 Ranchillo. Fit well. Easy to install. Made my wife happy so I am happy.

Definitely worth the upgrade from the standard panarello wand the delonghi dedica has. just be aware that it is extremely difficult to install the ball joint of dedica on the Rancilio wand you'll need pliers and a lot of force to push it through, the ball joint will definitely be deformed a bit when doing this but as long as you can get it through it works.

Fits the Gaggia Classic perfectly and is a very nice upgrade both visually and functionally. A no brainer - can't figure out why Gaggia does not use something like this to begin with.

I love this wand, has really helped me make hotter and better micro-foam for my lattes and although my latte art skills still need improvement. I can no longer blame the equipment. I bought this as an upgrade for my Delonghi machine and it’s been amazing. But work of caution make sure to buy a set of really small hose clamps I forgot the size but it’s like 8mm tubing

I have two Gaggia Classics and after using them for about a year, I decided to replace the original steam wand with this product. Frustration with the Gaggia steam wand is widespread and well documented. I was able to make the original steam wand work, for the most part, but I eventually became tired of its unpredictability and inability to obtain consistent and repeatable results. It's easy to swap steam wands using only a pair of slip joint pliers. As another reviewer pointed out, it was necessary to sand the end of the Silvia wand lightly in order to get it to fit. The instruction video that I watched (the one noted by another reviewer) did not mention this, and it created a lot of confusion and frustration until I was able to figure out what was wrong. I ripped a tiny strip of silicon carbide sandpaper and wrapped it around the end of the wand that is inserted into the coffee maker. Using the pliers, I held the sandpaper tight and rotated the wand a few times. Five or ten rotations was enough to make it slip easily into the Gaggia. The difference is night and day. The Silvia wand creates beautiful microfoam and heats the milk faster as well. It's easy to use, easy to control and easy to repeat the same results time and again. Well worth the cost and small amount of effort to install.

This is a huge improvement to this very budget espresso machine! These machines come with a self frothing wand which is a total disaster! As im a barista on a budget these small upgrades makes a huge difference! I've done this is the past for someones else to their machine! It's not an easy task to do it. The hardest part is to pull that white plastic ball over those bends on the new stean wand it took some elbow grease to do it! NOTE THIS ISN'T A BOLT ON STEAM WAND! U have to disassemble the machine to do it, it's hard but possible and worth doing it!

This wand works well as a Gaggia Classic upgrade. The install was quick and took under five minutes. No drilling or major effort needed, I just used a hammer to gently bend the old wand so the nut could come loose. After that, the replacement went on without any issues. Steam performance is noticeably better.

分解して取り付けるとの情報があったので購入を躊躇っていましたが覚悟を決めて購入しました。 思っていたより簡単に換装出来て純正より使いやすく交換して良かったです。 チップの継ぎ目から少し蒸気が漏れたので一応シールテープで巻いておきました

ممتاز ركبته على الديدكا موديل 85

De momento he podido hacer la sustitución de la varilla sin problema y funciona muy bien. Tres orificios para que salga el vapor y sale con fuerza y equilibrado.

.....