Question 1

I try this 1/4" version to nject fertiliser into line to feed & water pots.Output into drip line is 50l/h but there is no fertliser uptake.Help please

Accepted Answer

For venturi injectors to work, they need the right pressure and water flow. I suspect that this is not going to work for you. I am running into a similar problem with this type of injectors (not this one in particular). The 4th photo of this item shows the performance of this injector (1/4 inch A12057). Indicated water flow is between 50L (0.05m3) and 200L (0.2m3). The flow you are using is at the borderline of this injector not working (assuming that the flow to the garden is exactly 50L and not slightly below). Also check the pressure. Again, as indicated for this injector in the photo description, it requires between 28 and 43 psi for input and a maximum of 14 psi at the outlet (drip line). If you have higher than 14 psi at the drip line the injector will not work either, because venturi injectors require a certain pressure drop between inlet and outlet for them to perform. If there is anyway you could add some drippers to increase flow this might work. That's the curse of the small garden, videos you see online do not mention all these details. As I said before, I do not have experience with this injector in particular, but I will go ahead and buy it because based on my calculations I have a flow of about 50 gallons/h (~200 L/h), so this should work. Good luck!

Question 2

What thread size and type is this?

Accepted Answer

3/8" I'm using Stenner feeder tube nuts with ferrules to hold 1/4" hard tubing.

Question 3

Will this work as an aerator to inject air into a bait tank or aquarium?

Accepted Answer

yes no problem

Question 4

I'm new to this.. (1) what is the "check valve" for, and (2) what is it about "priming" ?... thanks in advance afr

Accepted Answer

Check valve is a kind of valve whose opening and closing parts are circular discs and act on their own weight and medium pressure to block medium backflow

ASIN	B07PG267ZB
Brand	TRKIMAL
Brand Name	TRKIMAL
Connector Type	Threaded
Customer Reviews	3.9 out of 5 stars 27 Reviews
Exterior Finish	Plastic
Exterior finish	Plastic
Inlet Connection Size	0.25 Millimeters
Inlet Connection Type	Barb
Inlet connection size	0.25 Millimeters
Inlet connection type	Barb
Item Weight	0.3 Ounces
Manufacturer	Kymlaa
Manufacturer Part Number	TRKIMAL0050
Material	Plastic
Material Type	Plastic
Model Number	TRKIMAL0050
Number of Ports	2
Outlet Connection Size	0.25 Millimeters
Outlet Connection Type	1/4 inch NPT female
Outlet connection type	1/4 inch NPT female
Specification Met	energy
Thread Type	NPT
UPC	743829247507
Unit Count	1.0 Count
Valve Type	check valve

Kymlaa Pvdf Venturi Injector with Check valves 1/4â€ Inch Gas-Liquid Mixing Venturi Injector for Ozone Generator Agriculture Fertilizer Irrigation Sewage Treatment Dosing Device Jet Device

Details

Details

Description

Specifications

Reviews

Common Questions