67mm Putter Variable ND Filter ND2-ND400 (1-9 Stops) 28 Multi-Layer Coatings Import AGC Glass Adjustable Neutral Density Filter for Camera Lens (Nano-X Series)

ND filter works perfectly! Used it for my 16mm lens (24mm full frame equivalent) on a aps-c camera. Zero vignetting all the way down to the last stop. Only shows X when you go past the ND400. Even directly only ND400 there is zero vignetting. Perfect for my Sony ZV-E10 II. Highly recommended!

Got the 1-9 to try it out. The only unfortunate thing is the label is on the bottom of one of my lenses. The other lens it's on the side. Seems to be due to the cut of the threads on the lens, not the filter.

K&F filters are fantastic, work as promised with zero distortion. Made with Japanese optical glass. Reasonably priced filters that are excellent!

What I was looking for

Camera - fx3 in slog3 shooting in 4K 4:2:2 10bit 24fps 1/50, 640 iso f1.4 on a 40mm sigma art. With the nd set on its darkest setting with the above settings on a very bright day it’s slightly over exposed with the aperture wide open. If I close it a little to f2.8 it’s a little under exposed in which i need to open the nd filter slightly. This does work really well for video work, it does have a slight color cast but it can be remedied either by adjusting your wb or just fix it in post. It’s negligible if your shooting in log. It doesn’t have hard stops so it does have an x if you go past the working ranges. And if you’re new to ND filters without stops, this doesn’t mean that the filter doesn’t work, it just means that you have to pay attention not to go past. Another thing worth noting is that the markings on the filter are not accurately lined up so it’s best to just either make your own markings or make notations on the ring to tell what is fully closed and what is wide-open without the X appearing. It’s honestly a great ND filter minus the lack of hard stops. The only other annoyance is that it doesn’t come with a cap but K & F does sell one for their older models that will fit this newer model, but you will have to cut a notch in the cap for it to fit correctly. I added a picture of this. I chose this over going with a polar pro due to cost effectiveness, and I’m not upset about it. There is another version of this filter that goes one stop darker up to nd1000 that I was considering getting. But my fastest lens is a 1.4 prime. If I had anything less than that and I wanted to shoot wide-open I would get that filter instead.

UPDATED REVIEW - Although I was disappointed in this filter, I have to say that the customer service is absolutely incredible in wanting to make things right by either refunding or giving me the option to choose another product. Anna from Customer service responded very quickly to my issue. Thank you for standing by your products! I really like the putter - it's so much easier to manipulate the filter. I am disappointed in the color cast and dark X type thing at certain times - not sure why this happens...

Great customer service.

Amo este filtro, puedes regular la graduación de ND y al no usar HSS este es la solución perfecta y la calidad de imagen sigue siendo superior, no quita ni un poco la calidad de imagen y es mi favorito en fotos de atardecer que amo hacer Ejemplo en mis fotos de como se oscurece y aclara

After several months of use, the filter has a stain in the middle that distorts the image quality by creating color discoloration, the stain cannot be cleaned because it is created between layers that can be seen in daylight. Impossible to contact the seller.There is no warranty policy.

Modifica un poco el color pero nada que sea muy molesto a menos que seas un profesional que necesite que si o si no se modifique ni un poquito el color.

Très satisfait de ce filtre ND variable. La bague de réglage est fluide et précise, sans le redoutable effet de 'croix noire' sur la majeure partie de la plage. La qualité optique est au rendez-vous : pas de perte de piqué ni de dérive colorimétrique majeure. Idéal pour la pose longue et la vidéo en plein soleil. Je recommande sans hésiter !

Exceptionnel produit

I've not noticed the dreaded X pattern, but I have not tested it near the darkest end where you might expect it to show, and plenty of reviews deal with the IQ well. My 77mm one will accept an 82mm screw in lens hood lens hood. Whilst I think K&F should point these sizes out better, once on, it is a great way to attach the right lens hood, IMO. I think it's a good higher-end budget option (at the offer price).