Professional Acrylic Plexiglass Sheet Cutter Scoring Knife Tool,With a Curved Handle,It Is More Convenient To Use.One handle,11 blades.(Yellow)

Good price and exactly what I need. I cut up to 1/4 inch acrylic. Just had to do extra passes. Comfortable grip and easy guiding.

Used this to cut some ABS for an electronics project - worked great! Made a score line deep enough to easily snap the 1/8” thick plastic in just 4 or 5 passes, then cleaned up the edge with a file. Came out well…

Good item

Ok I was skeptical about this and put off scoring this 1/4” the plexi glass that was $65 as brittle and chipped at corners. But took me few passes and was able to just snap off piece where I wanted to score it. Thumbs up here. Effortless.

Used this tool and it worked with no issues. I scored multiple times before snapping.

For only 10 dollars, it was well worth it. Cut through the acrylic with ease.

I used this tool to cut 1\4" plexiglass. It worked fine. Use a sturdy straight edge and an easy touch. Make a lot of passes, test by pressing your score line against a square edged table, score some more, test again, repeat... With patience you'll get a nice cut.

Not Substantial Enough To Hold Blade Securely For Safe Cutting I returned this product because it is dangerous to use and you can buy better Plexiglass Cutters from all over Amazon. I am giving this product the lowest possible rating because of 1) its very poor design; and 2) because of the incorrect instructions that came on the package. 1) The very poor design is that the plastic parts are not strong enough to securely hold the special Plexiglass Cutter Blade for safe cutting. The special Plexiglass Cutter Blade is poorly held in plastic side grooves with one spring loaded ball detent that is loosened by sliding the thumb slider backwards away from the special Plexiglass Cutter Blade. The special Plexiglass Cutter Blade is simply not held securely enough to stay in the handle. The “tip” of a knife blade is furthest from your hand. The “heel” of a knife blade is closest to your hand. To cut Plexiglass, or acrylic, sheets you first gently score a guiding line with the sharp “tip” part of the special Plexiglass Cutter Blade that looks like a conventional box cutter knife edge. Then you tilt the special Plexiglass Cutter Blade such that the “heel” of the blade, at a the rear cusp of the blade touches the scored guiding line. You drag this non-knife edge heel cusp along in the scored guiding line to dig a shallow narrow width groove. You make repeated dragging cuts to deepen the groove to more than ½ the thickness of the Plexiglass sheet. After you have a deep enough groove you can snap off the Plexiglass Sheet at the grooved line like snapping off scored glass along the scored glass line. For Plexiglass sheets you must drag cut a deep groove. The special Plexiglass Cutter Blade must be securely held in the handle to be able to use enough force to drag a deep groove. This poor design DOES NOT securely hold the special Plexiglass Cutter Blade. As designed, the plastic parts are not strong enough to hold the special Plexiglass Cutter Blade securely in place. 2) The package instructions are incorrect as shown in the attached photographs. It IS UNACCEPTABLE for the manufacturer to provide dangerous incorrect instructions. The manufacturer apparently has no shame or Quality Control. The incorrect package instructions are for a completely different blade type segmented box cutter blade. There are no package instructions whatsoever on how to remove the special Plexiglass Cutter Blade. The lack of instructions is a moot point anyway because the Plexiglass Cutter Blade is not held securely enough because of the very poor product design.

BIEN

this works amazing, it cut plexiglass so easy ! I strongly recommend

just what i wanted does the job

Excelente

Fonctionne très bien et avec précision . Pas besoin d’appuyer trop fort. Génial qu’il y ait des lames de rechange.