Stand Ergotron Neo-Flex LCD**New Retail**

They sent a product which looks used. It is badly scratched has rust on metal parts and little broken pieces were seen in the plastic packaging.Very bad experience.

Ich war zugegeben etwas skeptisch, über die Qualität eines alternativen Monitorhalters, aber meine Bedenken wurden nach dem Aufbau gänzlich widerlegt. Einfach an die Standartbohrung (4-Fach Verschraubung) anschrauben und fertig!Die Höhenverstellung funktioniert über einen selbstständigen Federemechanismus, bei dem man nur die Gewichtsschraube nach Bedarf einstellen muss. Das ganze ist kinderleicht. Einfach den Monitor auf die gewünschte Stelle hochziehen unter runterdrücken - perfekt! Der integrierte Drehteller könnte etwas besser gleiten, aber das empfinde ich als nebensächlich. Die Dreheinstellung zwecks Pivot-Einstellung funktioniert genial.Auch das Design entspricht der Halterung eines Originalhalters. Man sieht überhaupt nicht, das es sich um eine Erweiterung handelt, sofern man einen schwarzen oder silbernen Monitor hat. In diesem Punkt war ich besonders skeptisch, da ich gerade beim Design etwas penibel bin. Mit meinem iiyama ProLite E2207 (22") sieht das wirklich stimmig aus.Fazit: Die Halterung von Neo-Flex hält wirklich was sie verspricht. Sehr hohe Qualität, ansprechendes Design und sehr gute Funktionalität. Hinzu kommt die stufenlose Höheneinstellung, welche perfekt fuktioniert. Da ich beruflich mit dieser Technik einmal zu tun hatte, weiß ich das Federeinstellungen über Gewichtsschrauben nicht immer solide und optimal sind. In diesem Fall werden bei mir aber alle Erwartungen erfüllt. Volle 5 Sterne!

足周りが重いのでかなり安定します。縦にもできるし上下もできます。かなりいい感じの強さで動いてくれます。しかも安い

The internet age is great because you can find almost anything and with several hours of diligent review reading, can identify an item that appears to meet your need(s). However, the proverbial "rubber hits the road" when the FedEx/UPS/USPS delivery person kindly drops off your package. If you have bombed in your decision, then you face non-trivial return shipping costs, potential restocking fees, and lost time to achieve your desired goal. Typically, I search, contemplate, and search some more prior to pressing the order submit button. Eventually, I hope for the best, but resign to accept "average" if the product will simply work as described and appear to have a life cycle longer than 12 months.Thus, although I read the glowing reviews for this item, I did not have high expectations. The reviews here simply assured me that the item was an economic production from China. Imagine my surprise when I lifted the box from my porch to take it into the house. That box had some heft to it, that was a good thing. Once in my office, I opened the box and the smiles appeared. This is a quality product. There is a round circular base that attaches to the vertical portion of the stand via two phillips screws. Total assembly time with my ratchet screwdriver? Two minutes to ensure no cross threading and adequate seating torque. The monitor mount of the stand can accommodate any VESA mount with either 75 mm or 100 mm spacing. You are provided with phillips screws to attach the mount to the mounter, but you are also provided with thumbscrews. I prefer the knurled thumbscrews. The thumbscrews are black so they compliment both the mount and a black monitor.I purchased the stand for my 22" monitor. Installing the four thumbscrews in the 100 mm spacing took perhaps 3 minutes. Viola, c'est fini! You can adjust the tensioning of the mount in order to accomodate a larger monitor or have the monitor better respond to your tactile pressures. The monitor stand easily rotates 360 degrees. The monitor height is adjustable in the vertical direction 5". I would estimate that the monitor tilt is 90 degrees from its lowest to maximum tilt. All adjustments are nearly effortless. The caveat here is that "effortless" is determined by my build and your mileage may vary. The stand will also allow your monitor to rotate from landscape to portrait mode.Prior to mounting the 22" monitor, I mounted a 19" widescreen DCL LCD monitor that I purchased several years ago. I greatly disliked that monitor and had stopped using it. The picture always seemed small. The DCL monitor stand was an economical one, it provided no height adjustment and limited tilt. I mounted the DCL because I wanted to test the stand's operation before I mounted my more expensive 22" monitor. Four thumbscrews later I powered on the DCL, raised it 4" and thought, "hey, this monitor is not so bad!" That is the difference that the monitor stand made. I then installed the 22" monitor and the stand really performed. I thought that I would have to adjust the tensioning, but it was just fine. In 30 seconds, the monitor was at the perfect height and tilt for me. It has been a week and no adjustments were necessary as a result of the stand slowing lowering the monitor.Okay, allow me to put into perspective my experience with LCD monitors and their stands. My primary home office monitor is a Samsung 245BW 24" LCD. I like the Samsung's stand, but think that the Neoflex is better. I also have a 20" widescreen Dell 2007FP monitor. The Dell stand does not swivel (rotate 360 degrees on the desk) and the height adjustment is less than the Neoflex. In my work office, I have two 24" widescreen Dell 2407 monitors. The height adjustment is very poor on these and there is no swivel.In summary, this is an awesome monitor stand at a very competitive price. You will be hard pressed to find a better stand at an equal quality and price.

Update: After 2 years of use the stand is still the most recommended by me, I have since downgraded to a 24inch Monitor which it is designed for, and as expected it supports and maneuvers it perfectly. No wobble or fear of it wobbling over. Message me if you need answers or any information you may need on the stand before you buy it and I will be happy to answer with what I can.Highlights:-Removes any present lack of sturdiness from original stand-Ability to manipulate mode i.e. portrait or landscape viewing of the monitor.-Pitch and Tilt-Height fully adjustable-The stand has a ring in the base that allows the monitor to rotate on its base (can be desirable if you frequently need to rotate the monitor to show someone something.-Attractive finish-Easy to mount monitors to, and comes with four "easy to use" large headed bolts to fix monitors to the stand.An excellent stand for my Asus VK278Q LCD Monitor 27-inch Widescreen Webcam - Black.I scoured the forums for recommendations and this stand was mentioned to work quite perfectly with larger displays even though it is not rated or recommended to do so. My Asus monitor certainly weighs less that the limit of this stand and as it is VESA 100mm and 50mm complaint I decided to get it and see ow well it works out.A very sturdy stand, that does not wobble or swap if you knock the table it is on. I primarily ordered this stand to better align my viewing height with the monitors center as well as to replace the stand my original screen came with, it was terribly movable and the monitor would wobble with the slightest knock which has been removed completely thanks to this stand.It did fit perfectly as expected and the lifting function works perfectly, not to mention the tilt. Now the only thing worth mentioning in my case is it is not possible to position the display in portrait mode only in landscape and is perfectly fine in this mode. Any 27inch monitor will not work in portrait mode with this stand as it is not high enough but this is a decision of the buyer if using a non-complaint 27inch monitor as this stand is only supposed to be used up to 24inch monitors.This stand is of good quality materials, a metal base that has a rotating function, adjustable high mechanism and screen tilt options. easy to setup and install a monitor to and comes with descent instructions.Certainly I highly recommend it if you are in need of a good stand.Message me if you need answers or any information you may need on the stand before you buy it and I will be happy to answer with what I can.

I must say I am very pleased with this Ergotron monitor stand. I think this is better than monitor arm unless you need distance adjustment.Assembly is easy with a Phillips head screwdriver. Base material is of solid construction and the stand has decent quality.Tilt and height adjustment is effortless unlike the original monitor stand I had. Swivel will rotate the whole base but I think it's better than knob style swivel, again very effortless. The back is flush against the wall unlike monitor arm so it's another plus point for me (see 2nd pic).It can handle 27" monitor without issue. It also can handle the ThinkVision p27q-10 in portrait mode (due to the very thin bazel) without the need to tilt the screen forward.Definitely will buy another one once I have a secondary monitor.