UTEBIT Dual Flash Bracket 30cm/11.8 inches Extension Flash Bracket Aluminum Alloy Straight Flash Tripod Mount Bracket DSLR Camera Brackets Holder for Camera LED Light Flash Light Microphone

Super bracket for holding multiple accessories up at once. I had 3 different things on a stand at once using this and it worked perfectly. Nice quality Built to last Good size and you can even add extra bits to it from GoPro accessories to make that kit all work with it too. Very handy if you film or create content a lot

Absolutely brilliant product, product works as described and quality of product is excellent.

I was actually very surprised at how sturdy this was, it’s very well built and works well with my DSLR and GoPro hero cameras

Bought this item in order to mount two action cams side by side. Item arrived as described and within the specified time. It is a piece of machined and anodised black metal, ostensibly aluminium. The bracket is about 4mm thick, and resists casual bending: some effort might be required to bend it (but I'm not about to try too hard!). At the centre are a 1/4 inch and 3/8 inch threaded hole (with the actual mid-point of the bracket length falling directly between the holes, i.e. both the mounting holes are offset from centre by about 5mm). To either side is a long machined slot, about 6mm wide and approx 125mm long with each slot occupied by two 25mm wide thumbscrew 1/4 20 threaded camera mounting points that can be moved back and forth at will along the length of the slot; the underside of the thumbscrews also have a threaded 1/4 20 inch hole. The bracket is essentially as is described in the Amazon page. However... Unfortunately, the issue I had was with the length of the screws that are supposed to secure the equipment. Every camera I tried (2 action cams, 2 point and shoot cameras and 3 digital SLRs) failed to secure tightly enough. Despite turning the thumbscrews as tight as possible, there was still considerable play in the mount, and it was impossible to point the cameras without them moving. Having brought a screw-in handle to carry the mount and cameras I was left with a mount that was effectively unusable. From an examination of the bracket it seemed that the camera mounting screws were a fraction too long (only by about 1-2mm) and so weren't able to pull the foot of the camera body tightly against the bracket to secure it in place. So I had three choices: return the mount, reduce the height of the screws or find another solution. I needed the mount, so a return wasn't much of an option. I didn't fancy taking a file, angle grinder or Dremel to the screws to reduce their height, so I had to consider something else. In the end what I did was bought some foam rubber, self adhesive furniture pads (specifically, Grevosea 93 Pieces Furniture Pads Non Slip Furniture Pads Floor Protectors Self Adhesive Chair Pads Round Furniture Pads for Protecting Hardwood Floors 8 Sheets 1 Inches Black). I punched a 4mm hole in the middle of four pads and then stuck them over the upper surface of the camera mounting points, so that the threaded bolts popped up through the central holes in the pads. With the extra thickness of padding, securing cameras was a doddle, and all the cameras that previously moved loosely on the bracket could now be secured. So, as a bracket, is it worth it? Yes, it's worth the money and offers flexibility in use. However, you may (like me) be forced to splash out on the added expense of some self-adhesive pads in order to make it into the functional item it should have been in the first place. But on the bright side, I have lots of pads left over: it's just that I can't think of any nefarious uses for them at the mo... :-)

good item allows me to mount multiple items for my streaming set up

I used this to mount a an LED illuminated slide / negative carrier and an Canon EOS-70D. The Camera needs about 20mm extension tube and 18mm-55mm lens (or about 45mm to 50mm). I used a spacer to lift the camera held on by one screw and then 2nd screw is on rail. Mounted on a wooden base board for table use with two wood screws in the slots. One end of each slot is already threaded so you can remove the mounting screws. I'm sure it's also great for a flashgun or other accessories.

Great

Very strong and sturdy. Great size, light weight and useful.

Questa staffa è semplice ed economica, ma molto versatile e ben realizzata. Si tratta di una barra in alluminio anodizzato di colore nero, lunga 302 m, larga 30 mm, spessore 3 mm e del peso di 124 grammi, leggera e al tempo stesso robusta; al centro ha 2 asole longitudinali lunghe circa 124 mm sulle quali scorrono 2 coppie di viti da ¼ “ per fissare camere e accessori vari, 2 fori centrali per montaggio su treppiedi o stativi con filettatura da 1/4” e 3/8”. I materiali sono buoni e ben lavorati, le viti scorrevoli per gli accessori si serrano bene ed hanno un semplice ma comunque efficace pad per evitare scivolamenti e favorirne il fissaggio. Ci si può installare praticamente di tutto: la uso con fotocamera mirrorless e compatta, illuminatori, action cam e microfono e poi monto il tutto su treppiede o stativo; utilizzo semplice e veloce per una buona stabilità complessiva. Un’ottima staffa robusta e versatile con un ottimo rapporto qualità/prezzo.

Para mí es perfecto, tengo un canal de Youtube y para las comparativas de móviles me viene genial. Lo uso mayormente para eso y en el estudio para poner la cámara y a un lado un foco de luz, es genial, lo recomiendo. En cuánto a construcción, muy sólida, muy bien.

simple, fonctionnel et efficasse

even uitgestest en was wel tevreden voorlopig, voorlopig heb ik maar 2 cameras maar zal in tijd meerdere cameras hebben om vergelijking te doen voor mijn vlog op youtube

Sehr stabile Schiene, um multiple Geräte wie Blitze, Audiorecorder, etc. auf ein Stativ zu bekommen. Die Schiene vibriert nicht und die Geräte haben einen festen Sitz. Hier kann bei einigen Geräten ein kleines Problem auftreten: Die 4 Rändelschrauben sind SEHR lang und manchmal muss man sich mit einer Beilagscheibe o.ä. behelfen, um das Gerät festzuklemmen. Trotzdem ein sehr gutes Preis-Leistungsverhältnis und so eine Schiene sollte bei einem Stativaufbau immer mit dabei sein. Man weiß nie, was man alles so dranklemmen muss ;-)