(2-Pack) Calvana Gray Pool Cleaner Timing Tracks, Compatible with Pool Cleaner Models from 2006 to Present, Part Number 3295-133, Manufacturer Code 9985006-R2

Fantastic value. Maytronics wants $70.00 for the pair of tracks, if you can find them. The rubber seemed a little stiffer than the original tracks and did not climb the pool walls well at first. After a few hours the new tracks worked very well. I have about 30 hours on the new tracks and are holding up well. Good quality and perfect fit.

It was great but wrong size. Too loose

Although not exactly the same as oem tracks from dolphin, these worked as a great budget alternative. My tracks kept falling off my nautilus CC and I thought it needed new tracks. In reality the plastic center of the wheels wear down over time and cause the wheels to have excessive play and then the tracks fall off. The tracks fit fine otherwise, just be aware you might need new wheels and not tracks on the Nautilus CC model.

Our old tracks on our pool bot were worn and started coming off the drive wheels. This fixed the issue and was an easy install.

Well, let me start by saying I was a novice on these pool vacuums. I purchased this because I thought my old tracks were stretched out. They kept falling off when running. I received them and quickly realized it wasn’t the tracks but the wheels were worn out. Enough material had worn them down and allowed enough play so these kept sliding off.

Bought in Aug 2025. One is a little looser (on the right panel) than the other, overall not as tight. In about 3 months, the looser one had stretched to where it came off the track and started "chewing" into the side panel Styrofoam. The other one that was a little tighter (on the left panel) has also stretched but not as badly as the one on the right. The return window is now closed and I also need to replace the damaged side panel Styrofoam. This is for the Nautilus CC Plus

Ordered this to replace the treads on our Dolphin which was 3 yrs old. Our Dolphin spends most the summer months in the pool. Probably about 4 hrs daily for 3 months every year. At the beginning of the summer, the original treads kept falling off so figured it was time to replace them, so here I am writing this review. I wanted to wait for the season to be over before I wrote this; apologies that this is coming after the summer months. Better late than never. Installation was simple. Just watched a 20 sec video on a similar Dolphin and figured it out. Alignment of the new treads was perfect and the treads themselves looked identical to the original. They felt stiff initially but functioned very well. Climbed the wall like a brand new Dolphin. The new treads did not come off once the rest of the summer. So far it has been worth the price. Even if it only last another summer, these were half the price of the OEM. Will buy again.

These were really nice quality but they were about .5 - 1 inch longer than the oem tracks. I didn't really think much off it at first even though they did look a little loose installed. Every couple of days my cleaner would stop moving so I would pull it out of the water and the wheels would be jerking back and forth very quickly like something was stuck. I took it apart and the tracks were slipping off of the gears on the sides and preventing everything from rotating properly. The first couple of times I thought I wasn't putting everything back together properly but it finally dawned on me that the tracks were just a little too long and they were slowly migrating in an outwardly direction off of the pulleys. Since there's no automatic tensioner like on a car belt, the size and elasticity of the tracks are what keep them from working their way off of the gears/pullies. I put my old tracks back on which still had half the treads and you could tell right away the difference in fit and performance while moving. To be fair, Dolphin could have added some teeth or retainers to the 2 smooth idler pullies on both sides which would help hold the tracks in place a little better but instead they are just smooth. Because of this the center drive gear and wheels are the only things keeping the tracks from moving and a little too much play in the tracks will cause them to migrate outwards. Additionally, the side panels that contain all of the pulleys and gears don't sit flush against the pulleys and gears so when the tracks slip off they get stuck between the side panels and gears/pulleys which is ultimately the cause of the cleaner stopping. My cleaner is a Dolphin Nautilus CC Plus for reference.

Excellent fit

Arrived in very short time. Easy to replace the old grey tracks, which had stretched.. snug fit, with much better traction. Looked to be good quality.. time will tell.. seeing cleaner lives at the bottom of the pool. Price was very reasonable including delivery for the tracks.. I sourced a replacement swivel power cable, and repairs took all of 20 min to replace tracks and cable.. my old Dolphin pool cleaner is now refurbished and new again.. to give more years of cleaning..

Artikel passte nicht obwohl er passen sollte. Die Rückabwicklung war jedoch einwandfrei!

Perfect replacement for old worn tracks. Suddenly the cleaner covers the pool effectively, cleaning it all over just like when it was new.

Waste of money. Very frustrating Tracks fall off at least once a day. Not uncommon for both to come off.