Spray max USC 2k High Gloss Clearcoat Aerosol (2 PACK)

Growing tired of my old chair in the living room, I decided to give it a fresh coat. This spray paint applied evenly and left a nice, shiny surface without streaks or cloudiness. It was simple to work with, making the project quick and satisfying. I'm glad I chose this product for a simple refresh.

I spray painted something that I wanted to make very shiny. I bought Rustoleum high gloss clear for a top coat and tried three coats and wasn’t happy with the result. I think I could have done 20 coats and it wouldn’t have gotten any better. I googled a little and watched a couple of YouTube videos and this looked promising. I bought this and put on three coats and it looks great. Exactly what I wanted. It is easy to put on and very hard to make run or at least nothing like regular spray paint. I did get some great tips from watching the YouTube videos so I got it right the first time. Most importantly, you need to hold it a little closer than regular spray paint. If you wait 10 minutes to apply a second coat, rigorously shake the can again before spraying because it will separate in the can quickly. Just shake and you avoid the problem. I forgot to shake once and immediately regretted it. Anyway this is crazy shiny now. I can see why someone would use it on cars. Really great stuff. I don’t know how long the can will last. I got my project done over two days. One video said it could last from a couple of days to a couple of weeks but I don’t know what factors affect that. Once mixed, this isn’t going to last months or years on the shelf. Treat it like you would epoxy. Mix it and use it. What I mean by mix is smash the plunger on the bottom of the can to break the seal inside the can. Sounds hard but it is very easy. If you have never used a 2K, just watch a couple of videos.

I had no business pulling this off. Zero experience, no bodywork knowledge, just a car that needed fixing and way too much time spent researching. And somehow, this clear coat made my work look factory fresh. The Gloss & Depth, Absolutely Unreal I thought the paint I used looked good, but this took it to another level. The depth, the shine, no orange peel, no weird haze. It’s straight-up OEM-level clarity, and I haven’t even wet sanded or polished it yet. That alone should tell you how high quality this stuff is. Durability, It’s a Two-Part for a Reason Since it’s 2K (meaning it has a separate hardener inside), the durability is on another level compared to 1K clear coats. This isn’t your average off-the-shelf spray, it chemically cures into a professional-grade finish. If you want longevity, this is it. Application, Professional Stuff, But You Can Do It I won’t lie, this isn’t beginner-proof. It’s pro-grade, and you need to apply it properly. But if I can do it with zero experience, so can you. Just make sure you prep everything right and find the right products to pair with it. (I reviewed everything I used, so check my profile if you’re fixing a similar issue.) Spray Pattern, Not Your Average Can This isn’t some junky rattle can with a weak, spotty mist. The spray pattern is perfectly even, almost like a spray gun. But test it first! Spraying on cardboard or paper helps you get a feel for it. Work in light coats, keep it moving, and don’t let it drip. Dry Time, Faster Than 1K, But Not Instant It dries faster than a standard 1K clear coat, but it still gives you enough time to work with it. Be patient, and don’t rush coats. Price & Value, Expensive, But It’s THE Industry Standard Yeah, it’s pricey. And worse, you can’t buy it in stores. But there’s a reason pros use it, it’s the best you can get in a can. Whether that’s worth it for you depends on your project, but I wish they made smaller cans for smaller jobs because once you activate it, you’re on a 48-hour timer before it dies. Application Tips (Read This Before Spraying!) • Get a spray can trigger handle, it gives you way more control. (It just clamps on top and turns it into a mini spray gun.) • Test the spray first, don’t just go straight to your car. • Work in light, even coats, slow and steady wins the race. • Use it all within 48 hours, once activated, it’s done. Final Thoughts If you’re on the fence, just go for it. It’s not cheap, and it’s not dummy-proof, but the results? Insane. The fact that I got a glossy, smooth, no-orange-peel factory look on my first attempt tells you everything you need to know. If you take your time and do it right, this stuff will give you a finish that looks straight out of a professional paint booth. Would I buy it again? Absolutely. Hopefully, I won’t have to.

Night after applying, i was happy with how smooth and shiny my car looked. it’s definitely handy for touch-ups or a full repaint. the spray covers well and feels durable, resisting scratches and gas. i used it in my garage and it worked great, leaving a nice high-gloss look that really makes my vehicle stand out. glad i picked this one over others.

Great fan application. Great gloss with or without polishing. Can compound, polish and wax after 1500, 2000, 3000 wet sanding. Will bubble and separate if it exposed to afternoon sun while kicking off. The shady side of my project was fine. Requires three coats for best results. Sanding between coats will improve the look. Limited pot life.

I wish I could give 10 stars for this stuff! I literally made a mess of my vehicle trying to fix small things. When I purchased it used last year I didn't notice some discoloration on the front bumper, so I bought a bra. I didn't take the bra off when I washed my vehicle so I didn't notice until a lady backed into me in a parking lot that the bra had damaged the paint on my hood when I took it to the body shop for repair. The insurance company didn't want to pay for the entire area because of prior damage. The guy at the shop kept saying that he would just take the money and do something else with it since it wasn't enough to repair my hood and bumper!😳 He figured since I had a bra on it it wouldn't matter. I was so upset because I didn't plan on keeping the bra on forever. My plan was to eventually get my bumper fixed now It's my bumper and hood and the lady had pushed my bumper out some. After waiting on the money my insurance company would give me towards the repair I was trying to figure out what to do. Like I said I had made a mess, right. Well, I also had issues in my rear bumper because I was trying to back up with my trailer hitched. I am new to this trailer thing... Well my back bumper was pushed out some because of that incident which would have cost $1,500.00 to fix. I had spoke with my insurance company about all of this and I hadn't filed a report on the trailer incident and wasn't sure I wanted too because of it affecting my rate. It wasn't major damage just minor. But my trying to fix a little spot with Duplicolor made a small paint defect into a large. My husband and youngest daugther laughed at me. They said you don't paint your car with spray paint! Of course I just sprayed it on and had no clue about preparing your vehicle to be painted. Silly me was even trying to be cheep and used the wrong color that I KNEW was wrong because I had found cans of similar color at Dirt Cheap for $2.00 a can. There was nothing wrong with the paint other than one of them was for a GM charcoal gray and the other was for a Toyota Plantation gray; my vehicle is Toyota Magnetic Metallic gray. They were close but not right. I had bought the cans for a camper project so I had about 20 cans. Well, when I first thought about how I was going to fix my paint issues I thought about that paint!😂 Bad idea! A mess! More laughs from my husband and daugther... Thank God for UTube! I went to body piant school!😂 It rained and was cold for weeks and I have a carport not a garage. I know my neighbors thought I was crazy because before the rain started i was literally sandmg down and priming my car in my carport driveway because I knew the rain was coming and I wanted to be able to pull it in the carport when it started. People check out the prices of items before you buy them on here. I love Amazon. Buy from them all the time and usually my first place to go when looking for certain things such as this paint. Well, I can tell you I didn't like the Duplicolor clear coat from my experience with my back bumper. It was a runny mess! I actually ended up buying all the Duplicolor of my color in Alabama! 😂 Well, this was my first time and like I said the weather was a mess even with me buying plastic and covering my entire carport and putting three heaters in my carport. I also had blankets on the inside out the carport behind the plastic. I had to fix a few areas a few times with my wet sanding. Of course I had to go to "grit" school also!😂 Anyway, researching this clearcoat and wanting to make my husband and daughters and all my neighbors laughs into amazement I decided I would purchase this clear coat. A lot more expensive but what people had to say about it and the images I had seen I had to go with this one. I was so nervious because like I said the weather had not been forgivening in my area. Well, after sitting at home working on this thing for two weeks the day came for me to apply my clearcoat. My oldest daugther had been saying during the process, "are you going for a Matt look or a glossy look?" She was looking at my metallic paint that looked very dull. There were times I applied it because of the weather the metallic would just sit on top of the paint!😩 When I wet s no it of course that would come off. I had saw videos where it turned glossy after the clear coat applied. I had used a Duplicolor clear coat bumper paint on my bumper and it had got fry paint so I was not pleased with it either. I repaired the areaa Dan decided to order two more cans of this because I wanted to use it on my bumper as well. I had spent over hundred dollars with buying materials such as pads, sandpaper, towels, primer, filler, primer and filler, base paint, buffer, paint thinner, grease and wax remover, tack rags, compound, finishing glaze, and such and I didn't want to spent anymore money. I was broke. Well, I was nervous because this product has two parts, one which is a hardener. You have to use it within 48 hours of activating the two part system and to my amazement this product was the best thing about this experience! Just flawless! I have a few paint defects to fix and to do my compounding and polishing but other than that I am al,out done. I will post pics after I am complete. I posted all this to say, it can be done but it's not easy... Know what you are getting into when thinking about painting your vehicle but if you chose to take on the challenge. Use this clearcoat! It's amazing and nothing like the cheaper brand spray paints you find. Duplicolor is excellent in the base coat, if you use the CORRECT color!😂 But clearcoat, go with 2K!

This clearcoat does not mess around. It works super well. Here are some tips: 1. USE A RESPIRATOR. This shit is toxic and dries super quick. You do *not* want it in your lungs. 2. Shake it like you mean it. I let the product sit for an hour between coats and didn't shake it - immediately noticed the difference. (Went on "wetter", took longer to dry.) 3. Use multiple *THIN* layers. They dry faster, so you can get your item coated quicker. 4. The can says to use within 48 hrs, but I was able to use it up to 72 hrs after activating. I did notice some quality degradation, but it still worked overall. Over all, I would say this clear coat is awesome. Truly automotive quality in a can. It's a bit expensive - but when you realize what you're getting there's pretty clear value for the money.

Looks great.. Sprayed headlights on one car, the next day did the other. Great product!high quality shine great coverage.