PDA6BU

This receiver puts out great clear sound! Good quality at a great price!

I decided to wait a month before posting my review on this seeing there were a fair amount of mixed reviews. I purchased this from Amazon Warehouse Deals and it did come in the original packaging and I couldn't find anything physically wrong with it. Looked brand new. I use it with our home gym in our basement for both tv and music. I have it paired with an old set of Sony SS-B1000 bookshelf speakers. I also have an old powered Kenwood sub hooked to one of the line output jacks. Works just fine but you have to remember to set your sub to only process the low frequencies. Many powered subs have a switch on the back to do just that. It is plenty loud and fills the basement quite well at less that 1/4 of the way up. Happy with the sound quality so far as well but that has just as much to do with the speakers used as the receiver. Bluetooth seems to work well with my phone and I've never lost a connection. Pairing was a breeze. I have used an SD Card. That works well too once you figure how to maneuver the directories. Refer to the manual for help on this if you need to. The remote seems to do what is is supposed to do. No issues there either. All in all, I am very happy. It does what I need it to do and I give it 5 stars due to the functionality and cost. It suits my needs perfectly. Would I want it for my main home theater? No, but for the basement gym it is perfect.

I am the DJ for my wife's Mary Kay business group. After years of making do with low-power (under 100 Watts) amplifiers, I took a chance on this 200-Watt amplifier to power the music I play for them, and the wireless mics used for speaking. Connected to my Bose 301 bookshelf speakers, rated at 150 W, the Pyle amplifier provided more than enough power for the 50' x 50' room filled with 75 women. I was impressed with the loudness, limiting the volume to about 40% to avoid discomfort to anybody, including me, and to avoid the possibility of over-powering my speakers. Most of the time, I had the volume for my Pyle wireless mics at 30-35%. From a purely-power standpoint, the Pyle amp did great! Also love its small footprint and relative low-weight. Its small size is indicative of very little wasted space...a very good thing! Normally I plug the wireless mic receiver into my mixer, but tried the amp's mic input to see how it sounded. Compared to my mixer input, the amp's mic input sounded rather tinny, even with adjusting the bass/treble. I really haven't had much time to play with the amp. My primary concern was power for the music. I received it about four days before the Beach Retreat, its primary use. I hooked it up to my TV at home in place of my Kenwood 65-watt stereo. As soon as I powered on, I could hear the difference! The input selector knob is quite stiff to turn, but did its job. Have not played with the Bluetooth yet, or the remote. I wish the unit had more than two sets of RCA inputs on the back, but that's small stuff. The rest of my setup includes using iTunes on my laptop, running through a simple 4-channel Realistic mixer, which connects to the CD input on the amp. I used my desktop computer for the slideshow and videos. The video sound was connected to the DVD input on the amp. This Pyle amplifier is not my first Pyle product. I started with a set of Pyle two-way speakers for my old Nissan truck several years ago. Rated at 120 watts, they sound great! As part of my growing DJ gear ensemble, I purchased a Pyle lapel mic to be used by the Mary Kay Directors at their events. Sadly, the lapel mic was not very durable. BUT...the Pyle Handheld 2-Mic Wireless System I bought next works beautifully! An event over the summer took place at the Dallas Hyatt Regency hotel. I used my Pyle wireless mic system, and had a wired mic as backup, provided by the hotel Audio Dept. When we tested the Pyle wireless mic against the wired mic, the Pyle wireless mic blew it away! We were all surprised the wired mic sounded so crappy compared to the wireless. The wired mic, by the way, was professional studio-grade. A wonderful side benefit of the Pyle wireless mics is their light weight. I had never heard of the Pyle brand before I bought my truck speakers several years ago. With subsequent purchases of audio equipment, I am becoming a believer in the Pyle brand. Very good quality at a reasonable price. As mentioned, I have not played with all the features of the amplifier as of this writing; hence, four stars instead of five. There is always room for improvement :) FYI - I am a 30-yr Computer Professional, and Audio/Video buff on the side, so I know what I'm doing.

I bought this unit to go with a couple Polk Audio Atrium 6 outdoor speakers along with 14ga speaker wire. The Initial bluetooth paring was seamless which was initially a good sign. The initial sound was great when testing out the first connection before mounting it. I took my phone 15 ft away from the receiver to check the bluetooth and the music would stutter and glitch in/out even with direct line of site from my phone to the Bluetooth antenna. I figured that there may be some nearby interference so I left my phone next to this unit while I continued with the install as one can buy a bluetooth extender to plug into the extra audio input methods for the bluetooth issue. I got one speaker hooked up in place and all sounded more or less great when I re-tested it out with my phone next to the unit. I then wired the second speaker and tested it as well and the second speaker had some fuzzy sounds to it no matter what. I rechecked all the connections and all were secure. I swapped which speaker went to which speaker connection and the second connection regardless of speaker was fuzzy. I swapped around to test out if the speaker or wires were the issue and connection 1 regardless sounded ok. I then rechecked the wired path of the audio connections to make sure I was far away from any power cables and adjusted as needed to make sure. I then played with the volume vs balance vs base vs treble and no matter what, the second connection was fuzzy. I let it play for about an hr while I ate lunch inside and came back out to both speakers being fuzzy. I tried some smaller speakers from by old boom box and they too sounded fuzzy. I had high hopes but there is something internal of the unit that was off from the start and progressively got worse over literally a couple hrs. I repacked everything to as received and will be returning this unit for something else.

bonjour ça ne respire pas la qualité,une voie qui ne fonctionne pas ,obligé de refaire les soudures sur le circuit intégré TDA7323 qui ne developpe pas 200W mais un 35W RMS,le connecteur sur le rail d'alimentation qui est mal soudé;les vis sur le capot qui tournent dans le vide et un soucis de masse qd on touche le boitier un point positif ,c'est que c'est une alimentation avec un transformateur torique de type symétrique

Por el precio muy buen ampli, levanta mis bocinas de torre sin ningún problema. La equalizacion con potenciómetros es mucho mejor q los ajustes digitales de otros amplis, permite un ajuste fino de bajos, agudos y volumen de los micrófonos. La entrada de micrófonos funciona excelente, gran calidad de audio y muy buen control de volumen y ecos. Recomendado si quieren algo, bueno, bonito y barato.

Finally I got this fantastic Amplifier at bumper discounted price. I will not disclose the price, this is against the buyer/seller policy. There was an European power plug so I attached an Indian plug attachment & because I was in hurry to check so I did a blunder mistake. I didn't check the 110/220 Voltage selector and switched on the power, there was power just for 2-3 seconds & then Amplifier went off. I understood that something went wrong, I checked the back side and there was Voltage selector and switch was at 110V. Because I am a computer hardware Engineer I thought that there must be a fuse, I checked back side there was no fuse, then I decided to open the Amplifier. I opened 8 screws and opened the cover, the inside view of Amplifier was also fantastic....heavy quality components, Well managed cables, good quality PCB, All switches were arranged at a separate PCB. I was searching fuse, yes there were 2 DC fuses & 1 AC fuse. I opened the capsule of AC fuse, yes that was busted I took a deep breath & said thank to God. The fuse was in my toolbox, I changed the fuse & inserted the plug and switched on yes that was perfect. One cable was slightly out from body I arranged that with 2 cable ties, covered up. Amplifier is really really superb..... look wise, built quality wise, features wise, sound quality wise. all the latest features are there. Bluetooth antenna is also there for better signals from much distance. A FM antenna plug is also there. You can attach 1 pair of medium size Box speakers. Balance, Table, Bass & Selector Mode volumes, 2 Mic inputs & controller, USB & MMC sockets, Aux input all are there. Sound quality is also superb, realistic & fantastic, 200W RMS sound output. I would like to give one suggestion to Pyle Company to modify one thing in this, there is a big Air Vent in Amplifier on upper side, in Indian environment rats are everywhere and that is unsafe due to rats, rats can put pees there. The Company can increase the size of Air Vents of left & right sides.......then the Amplifier will be perfect one. As I have told that I have got this at bumper discounted price but in general the price is lil bit high but customers can buy in sale period. Thanks a lot to Pyle Company to make such nice Amplifier, thanks a lot to Amazon to provide such nice products at very reasonable price & super fast delivery.

Good quality product

Llego muy bien, entrega rapida a precio razonable