J-B Weld™ Syringe Original Cold-Weld™ Two-Part Epoxy System, Ultra-Fast Setting Time, High Strength, Suitable for All Metals and Other Materials, Dark Grey 25ml

Absolutely brilliant, fixed my kitchen tap by bonding two small pieces of metal (super glue had failed). 10/10 strength and application.

This stuff is really good. I was a bit dubious at first as it’s quite loose when it comes out of the syringe and stays the same on application which, to be fair, helped me out. It stayed sticky for hours afterwards causing me to think it isn’t set properly or my mix want correct. However after leaving it overnight it solidified into a really strong bond which hasn’t budged since. For reference I used it to repair a broken weld on a bar stool frame.

Astonishing product. For the prize its repaire propertise are remarkable. Used to fix debris damage on an engine sump.

Use to repair / plug hole in lawn mower deck. The deck of the law mower had rusted through in places and I used this as a metal filler to plug the holes after I cleaned them up. Seem to have done the job.

There is an error in the product picture, which contains an incorrect strength figure. I attach the correct photos of the packaging. The same information is verified with J-B Weld web site. Refer to their web site for safety info, the product is reasonably safe. I also include photos of my project with this product – a hinge bonded to Ni-Ti metal of Flexon glasses. The strength figure 5020psi is about a lump of cured epoxy being pulled apart. Its bonding strength is lower, somewhere about 3000psi for steel, 2000psi for aluminium, both degreased and roughened, less for plastics and glass. This means that gluing two parts together, it makes sense to also spread some of this product on the adjacent to the contact area, thus increasing the bonding area. It is not mentioned for this particular product, but similar epoxies bond up to 25% stronger if cured at about 40C rather than room temperature. This epoxy thickens slow, within 4-6 hours, and then gains strength throughout the following 15-24 hours. So, give it time to develop. I would not trust the marketing statement about 550F (288C) temperatures, because it is probably not its Tg (glass transition temp, almost complete loss of "strength"), although who knows! Most epoxies have Tg around 60C-80C. It would be interesting to find out Tg for J-B Weld original! The only negative is its colour - clear epoxies look more tidy. Great product, I used it in the past with great success.

I was wary with this product as I usually use Devcon, but that carries a premium price now, so I gave this a go. It mixes easily if not a tad too wet, but given time it thickens and sets. Setting time is best left overnight, but I can't knock it. Has worked well, and has proven to be sandable. Nothing gets 10/10, but this is a solid 9/10. I used it btw on a model with 50 yr old plastic, and on mounting ski bindings.

Great fix a whole saved me loads

Bought to bond a metal cap onto a plastic stopper on a cable machine. This set tacky within minutes, solid overnight. Stops the wires grinding in the pulleys. Done just the job, is resealable and can be used again. Got loads left so will probably stick the Mrs to a wall in the spare room for a bit of peace and quiet.

This product is very good. It cures very well and it sets properly hard. Good for industrial use. I used it in my car. For a coolant tank crack but unfortunately didn't work well for me, but the product is good.

This epoxy is perfect. I use it to weld pinbacks to enamel pins. It's so sturdy. Even with the expensive shipping to the Netherlands worth every penny.

Hält das was versprochen wird.

Un buen producto, mucha adhesión. Fácil de usar

Aaaalso, dieser 2K kleber, hat in vielen Situation haufenweise Geld erspart, Beschreibung beachten und auch so umsetzen, 1 zu 1 mischen bis es schön grau wird, auftragen/einschmieren, wenn nötig nachbearbeiten, wenn man mit der Arbeit selbst fertig ist, lasst es am besten, im TROCKENEN und +15°C bereich trocknen. Es ist kein Sekundenkleber. Wenn es trocken ist, kann man nachschleifen, je nach bedarf bearbeiten. Besseres als das, habe ich bis jetzt noch nie gesehen. Sehr Gut für Heimwerker bis Bastler, sogar Handwerker.