AMVR Glasses Spacer Compatible with Oculus Quest 3S/Quest 2/Rift S Accessories, Soft Silicone Anti-Scratch Ring, Protect VR Lens and Prescription Glasses from scratchings（Not Compatible with Quest 3）

A very simple and effective solution to keep your glasses and Quest lenses from rubbing and scratching. The product comes with plastic frames that snap around your Quest lenses and silicone rings of various thicknesses to fit over them. For me it was easier to snap the plastic pieces into the headset first, then put the rings on. They work to keep my glasses from contacting the Quest lenses so no worries about scratches anymore. Since your glasses do rest on the silicone rings, you may have to pull the headset and adjust the positioning a little every time you put on the headset to get it into the right viewing spot (especially if you have progressives) since the silicone has that typical non-skid property. I'm using the red/blue combination (they do come with pairs of black ones in different sizes as well) and I don't see or notice the color when I'm wearing the headset. They seem like they will last a while as long as you're not taking them on and off all the time, so for the price, it's worth it.

They work well just a little tricky to get the silicone onto the plastic properly but after that they do the job you still need that spacer attached on the Quest imo or its going to press your glasses to tightly against your face Its a little more work to get a proper fit but once I do no issues at all

This product was frustrating to say the least. It says to remove the original protectors - though after a good 15 min googling videos I learned there weren’t any. I also found it way easier to line the frame up, pop it on, then add the rubber ring. Half the struggle was getting the rubber on before hand. Once frame was attached the rubber went right on with ease and didn’t move around or fall off - at all. Less than 5 minutes to install this way. Had I not tried a different way I’d have returned them due the frustration trying to get the rubber on the plastic ring. Now that they’re on they work like a charm. My daughter has the thick black frame type glasses, and this product now allows her to wear them while playing. One star removed from rating due to the fact that the instructions could be better - they could include an image to show if there’s an existing protector, or add a note that a brand new one may not have any.

I didn't know about these until it was too late, I already have scratched lenses but now I have these in for my son and can protect the lenses and keep them from getting worse

More comfortable than the hard eye glass spacers

These are pretty much godsends if your eyes are horrible. I thought that I could do VR without my glasses; that the closeness of the lenses inside the Oculus Rift S would fool my eyes into thinking that they're not horrible. Nope; seems like my brain still interprets virtual distance as real distance, and applies my real eyes' (somehow completely skewed) focal depth to the virtual sights I see through the lenses. The visual input must still be adjusted for my brain to make any sense of what I'm seeing, and it's just a fact that the default spacers within the Rift S are too thin to accommodate my glasses. (And I would assume most people's, also.) Thank GOD for AMVR and their manufacture of vital VR accessories, like these new spacers. They're simple; they and their adapters (so they can fit on the lenses) look 3D-printed. They're the same shape as the default spacers, so (when reinforced by the adapters that come with them) they can fit over the lenses just like the default ones. I wasn't prepared to experiment with the right thickness of spacer to use, and risk scratching my precious VR lenses - though I did experiment once with my glasses with the default spacers, I didn't accrue any scratches and I consider myself lucky. So, I went straight for the thickest ones, and they work! Now I never have to worry about scratches on the VR lenses, from my glasses at least. One might think that $20 is too dear a price for simple 3D-printed pieces of plastic that weigh less than an ounce. BUT the peace of mind of knowing that we don't have to put out a potentially much higher amount for replacement lenses, which are doubtless trickier to install than these, is worth the perceived extra cost for me. THANK YOU AMVR! [As per the picture - since the lenses are still going to be so close to your face when you use these, you will still only see black, not the additional colors, so you won't be distracted. I just chose to use the colors because why not? A little extra bit of style to look at when I'm not using VR.]

I had to get these because I need to wear my glasses with my Quest 2 in order to read anything and the glasses spacer that comes with the headset just isn't good enough at ensuring that the glasses lenses don't contact the VR lenses. I got these and there is literally no possibility of them scratching each other anymore- and I have big glasses with lenses that bulge forward pretty far. I've gone so far as to jam my glasses inside and the bumpers just will not let them contact the headset lenses whatsoever. It feels so good to be able to use my glasses and not worry at all about the lenses scratching each other by accident when I adjust the headset or turn quickly anymore. If you wear glasses, I'd even go as far as to say you should order these during the same day that you order your headset, they're practically essential for glasses wearers, come with tons of different sizes to fit how you want them to, are super easy to install, and are very cheap!

It does the job, but my son hates them & they shove his glasses into his face causing terrible red marks on his nose - and that is with the thinnest guards on! I wanted him to use the thickest (to protect the VR & his glass lenses more) but there is no way that he could. This box comes with 3 different color options and each color has 3 variants of thickness which is great, but also very wasteful because we will never use them all. Unless they don't last? Is that why they send so many I wonder? I hope that's not the case.

Fit fir oculus quest 2

Passt perfekt und erfüllt genau seinen Zweck. Das Zubehör sitzt gut, ist stabil verarbeitet und verbessert den Tragekomfort deutlich. Besonders praktisch für Brillenträger. Leicht zu montieren und hochwertig verarbeitet. Sehr zufrieden, klare Empfehlung für VR-Nutzer.

Managed to fit in the ring onto Oculus Two. Need to rotate the ring to find the correct position to clip it in.

Great. Easy to fit. No more worrying about scratching the lenses on both the Metaquest or my glasses. Also better focus, thanks to the spacing caused between glasses and vr lense

It works as described. But the price is insanely high for the quality of product you receive. I mean it’s just rubber and silicon 🤦🏽‍♂️