CRAFTSMAN Electric Chainsaw, 16 Inch, 12 Amp Corded Chain Saw Electric, Ergonomic, Powerful Motor (CMECS600)

I was very impressed with the ease of use and the job that this saw did. Easy to put together and use. Works exceptionally well. It is build well and seems to be very durable. Adjusting the chain was simple and straight forward. The saw was not too heavy. Good product as a good price. I would buy this product again.

This is a decent chain saw. CRAFTSMAN Electric Chainsaw, 16-Inch, 12-Amp (CMECS600) It is not an imitation saw-like thing trying to be a chain saw. There is a review in which a guy mentioned he bumped himself with it while running and did not get cut. He makes this sound like it could be a toy or waste of money. I don't know what he or his saw did, but this chain is very sharp and runs smoothly and true on the bar. The motor is plenty powerful. The saw is nicely balanced and handles like any gas chain saw I've used, except this electric style is quiet, smooth-starting and smooth while running and you don't have to fight gas starting and idle problems. It has the classic chain saw two-hand grips: left hand on top at the balance point with a protective knuckle shield, and right hand on the rear with the switch. (That configuration was a must-have for me.) I cut through branches ~ 4-5 inches in diameter of Lemonade Berry ( a CA tree with medium hard wood) in < 5 seconds per branch. No special effort needed. I'm totally satisfied with the performance of this saw. Some folks have commented that the chain continues to run after you let go of the switch. Yes, the electric motor does not have a brake-when-off circuit (ahem, this would be very easy to do though Craftsman folks!) So the chain will coast down to a stop in a couple of seconds. That said, in my opinion having the chain coasting down for a couple of seconds does not scare me or detract from the utility of this saw. If you are at risk of contacting the chain or bar within a couple seconds of finishing your cut, then I think you need to review your cutting practices, not be relying on a different saw with an instant brake. This saw has an adjustment mechanism for setting the bar position to tension the chain. The big red knob on the side of the saw housing is a clamp knob. There is a smaller knob that drives a pusher screw that pushes the back end of the bar forward to tension the chain. It is easy to adjust, and as long as the clamping action holds up for the long run, it is easy to use and does the job. If there is anything that toes the line of flimsy about this saw, it is this pusher screw mechanism. If I were designing it, I would have payed a bit more attention to materials and pressure points in that setup, but it does seem to work so far. It certainly does make it easy and convenient to re-tension the chain, and that is a good thing. In short, I think this a a decent chain saw capable of cutting branches that are big enough that you would have no practical chance of doing by hand. At $80, it's also a very good price. It was cheaper than hiring someone with a saw to do the job for me. Glad I bought it. Added 6-12-2024: One added note: when you are finished using the saw and going to put it away for storage, be sure to drain the chain oil reservoir. The oil will leak out of the reservoir no matter what position you store it in. Just turn the saw over and pour the remaining oil back into the original container. Not too hard, and way easier than cleaning up a few ounces of sticky chain oil!

I really love this unit. Its a go getter. Every bit a really good chain saw. No issues. Works perfectly.

For the cost, this is an excellent chainsaw!! First know that this is the same version as Black+Decker version. Stanley Black and Decker (SBD), which also owns DeWalt and Porter Cable among other brands, bought Craftsman and just changed the color plastic in the injection molds. If you are like me, you feel better buying Craftsman. This little chainsaw is supposed to be only for light loads, but I put it through the ringer doing stump removal and sawing through stumps. It worked well and was able to remove the smaller stumps, though it struggled on the big 3ft+ stumps. I was able to get a lot of the big roots and even remove big chunks of the stumps. This is really gas chainsaw application (or stump grinder) so I was pretty impressed it was able to cut. Went through about 6 chainsaw chains, that's what happens with stumps and rocks. I also used it to cut small trees for firewood and it worked great. Why not 5 stars? The chain tensioning system really needs to be better. The dial is easy to use but it gets too loose, too easily. Also too many plastic parts when I would have liked to see these be metal. I'm sure this was to save costs (which I did appreciate) but I would pay a bit more for a slightly better system.

Like the Craftsman tools of years ago, designed with thought and simplicity. Made in China but its done very well Powered up out of the box and then cut a 4x4 like butter.

very good for the price. much lighter than the gas models. it has handled everything so far

easy to put together no tool's needed. fast easy cuts went thru pressure treated 6/6 in a few sec no issues. just made sure chain was tight after a few cuts to account for the chain stretch from use . very good price for the craftsman chainsaw.

It works good for what I needed it for. I had some pretty thick branches and trees to take care of but did the job. The chain does come loose on occasion so u have to constantly tighten it. If your not cutting down trees on a regular basis this might be worth it for you. I found it easy to put together with the help of social media and easy to use.

Cuts almost as well as my 16" Stihl gas chainsaw. Easy to change and/or tighten the chain. Oiler works well with no issues. Just took down a dead 14" apple tree. Super hard wood and went through it like butter.

Muy buena potencia para ser electrica, consigue una extension electrica y podras hacer muchas cosas con esta sierra

Buen producto a buen precio

Great saw, wish it had a chain break though. Lots of power and cuts well.

Adjusting chain after install took some time. Once done very easy to use. Powerful enough to cut a 1 ft diameter elm trunk. No issues. No overheating. Good product for the price.