USB to VGA Adapter

I bought this as my new laptop did not support video output from the usb c port so I could not use a usb c docking station to add a 2nd monitor. This worked and the driver flash was easy to find when I plugged it into the usb port. The only thing I would point out to anyone buying this that has a relatively new computer is that the output only supported 1680x1050 resolution. I almost thought it didn't work as the screen was black even though the system recognized a third monitor. Once I changed the resolution from 1920x1080 to the next one down of 1680x1050 the picture came on and looks great. I suppose it probably isn't going to work if you are looking for super high resolution gaming or graphic design, but perfect for what I want. Easy to use and the driver is right there in the device when you plug it in. Just click on the driver you want to install (I am running windows 10, so I can't vouch for the Mac driver) in file explorer and restart your computer and then plug in your monitor.

My HDMI port no longer worked on my laptop. I thought I would have to get a new laptop because it would cost too much to get repaired. The computer repairman suggested I get an USB to HDMI adapter so I did and it worked great. I had to go online to download the driver but once I installed it the adamper worked like a champ.

I just bought a new PC with a GeForce GPU. To my dismay I discovered that my BenQ monitor was incompatible with all GeForce type Gpu's. I decided to give this dongle a try. It did not work at first because I did not read the instructions which were you have to download the driver from the Benefei website. After doing that this dongle worked FLAWLESSLY! My monitor runs with no problems and no lagging at 1080P. It sure is nice when a product works as advertised.

The first one I got was defective. Only did 800x600 as windows thought it was USB2. No way to get it recognized as USB3. Closer examination it seemed to me it was missing a USB3 pin as far as I could tell. Submitted the return for replacement and they delivered the new one the NEXT day. Plugged it in and worked without doing anything except aligning the displays order in Windows. I use it on a corporate (managed) machine so I did have to take it to my IT department to have them install the drivers but that was merely OK buttons, no problem installing software. So far very happy with the product. Very happy with service. Now thinking of getting an HDMI version for when I travel since the Surface Laptop 4 has no video out to watch movies on the hotel TV like my old PC.

Drivers not supported after windows 11 update. screen flickers and blacks out periodically. No update to fresco logic drivers. removed this adapter and Fresco Logic drivers and purchased new adapter wavlink 3.0 to hdmi adapter to work with display link drivers. works much better.

I had to purchase a new desktop months back and ended up getting one that only has a single HDMI port. Well, I run dual monitors so obviously I had to figure something out. My wife has a similar desktop and uses a USB to HDMI adapter (BestBuy adapter) for her second monitor and it works great. Trying to save a few bucks I decided to try this benfei adapter. Does it work? Yes. Do I have to unplug the adapter from the USB port and then plug it back in every time I wake my PC up from sleep? Also, yes. If my monitors are just powered off but my PC isn't asleep, both monitors will turn back on as they should. When I get on my PC first thing in the morning to do some work, only my primary monitor that's plugged into the PC's HDMI port will work. I have to unplug and plug the benfei adapter back in to get the second monitor to work. It's not a huge deal but it is annoying. I haven't noticed any issues while the monitor is working, so that's nice. I can't say that it is worth the few dollars you'll save, but who knows, maybe it will work perfect for you.

This device comes with instructions along with a little CD with drivers on it. However - - - You do NOT need the CD! Simply plug in the device and then open Windows File Explorer. You'll see a small "drive". Double click on it, and the install files are there! NOTES: 1) Plug this device into a USB 3 socket only! (look for the "SS" next to the socket. If you do not do this, you will be stuck with 800x600 resolution which is terrible). The instructions will tell you this, but not until the end. 2) Open Windows File Explorer and click on the little drive to open the driver. 3) Let the driver install, and then restart your laptop/computer for the changes to take effect. All the above took me 5 minutes and now my Dell Inspiron (i5) laptop is driving 2 Dell 27 inch high def monitors. One screen is connected directly with HDMI. The second screen is connected using this device: USB 3 port on laptop to HDMI plug from monitor. Screen resolution is awesome.

My Dell XPS8950 computer with integrated Intel UHD graphics came with exactly ONE video output port, a DisplayPort. So, how to support a second monitor to extend my desktop? My premium Dell support wasted 20 minutes and was trying to tell me I needed a Docking station! This device was a solution. It did require downloading a driver installation program from the seller’s web site before it would work, despite both the Amazon product page and Wndows 11 saying the built in driver would work. But the product docs suggested the website address for the download. I’m pissed at Dell for selling a PC like this and not being able to suggest this solution and not offering their version of a solution as a Dell part (I looked hard). I have to admit part of this problem was I purchased monitors that didn’t support DisplayPort “daisy chaining”, which would have required only one cable to handle this.

The item works perfectly! Just note you need to install the drivers from the cd (which is also included in the packaging) before the device works. takes less than a minute to install. No quality loss on the 2nd monitor, so you won't be disappointed.

First of all the important bit.. yes it works when I connected USB3.0<>HDMi and also USB3.0<>HDMItoDVIadapter<>DVI. The picture resolution is full HD and perfect quality. I have actually got 3x monitors so 2 of them are on the card (Dsub, DVI) and this third monitor is on USB3.0. Everything was working fine and I was thinking about leaving a 5 star review because there are very few products of this class which actually works... But... here comes the but... I have connected it to my Desktop/Server system where I do lot of work including work on virtual machines so I do not turn off my PC for weeks even months because I don't want to waste time spinning up all VMs and opening all docs and browser pages etc. I normally send it to sleep before going to bed or the PC automatically goes to sleep/hibernate after 2 hours or so... after the installation of this adapter I went away for few hours and when I came back all my monitors were blank and PC was on. No matter what I tried the PC didn't come to life until I did a hard reboot and it all came back with a clean slate. So all work was gone! I then tried to manually hibernate it from start>shutdown>sleep and it went well, all monitors went to sleep but within 2 mins PC restarted! I tried different combination of cables, even shutdown power saving for USB port but it will restart every time if I put it in sleep mode (manually) or it will just hang if system goes to sleep after set duration. As soon as I removed the box the sleep functionality started working as normal. So, for some very odd reason, this box does not work for SLEEP/HIBERNATE mode. If you are a person like myself who does not want to turn off his PC then just consider above issue otherwise the device is fine. = = = I have had a detailed discussion about this issue with Benfei customer services and they have been very helpful in determining the issue and sending me another product to test. The new item they sent did work well with no issues at all (on Windows 10) so I think the previous item may have some issues which was causing the problem. Based on their response and excellent customer services I am elevating the rating from 3 to 5.

Ich habe sofort nachdem ich meinen Bildschirm angeschlossen habe gewusst, dass ich diese Rezension schreiben werde. Ich habe einen Lenovo Yoga 530, bei dem über die USBC Schnittstelle nur Daten aber kein Bild übertragen werden kann. Ratlos habe ich nach einer Möglichkeit gesucht, einen zweiten Monitor anzuschließen. (die Hdmi Schnittstelle war bereits belegt) Es gibt hier auf Amazon unzählige Lösungen für USBC zu Hdmi (was bei mir nicht hilft) und auch USB 3.0 zu Hdmi. Bei letzteren findet man in unzähligen Kommentaren die Warnungen vor Trojanern und teilweise spanische Rezensionen die nach der Übersetzung irgendeinen Bildschirmständer beschreiben... Da ich die Erweiterung nur für Office Anwendungen benötige, reicht das Bild und die Verbindung somit über VGA vollkommen aus, sodass ich wirklich Dankbar bin einen Adapter für einen so schmalen Kurs (€) gefunden zu haben, bei dem auch mal ein Markenname drauf steht und man nicht so ein pechschwarzes Ding bekommt, dass schon auf den Produktbildern nach billig Ramsch aussieht. Alternative Lösungen sollten weit über 50/60€ kosten. In meinen Augen inakzeptabel. Daher: Klare Empfehlung! Ob das ganze bei jedem Rechner funktioniert, weiß ich nicht. Aber ich bin ziemlich zuversichtlich. Der Treiber war blitzschnell installiert, einmal neu starten, fertig. Alternativ liegt eine CD dabei, ist aber vollkommen überflüssig, da sich sofort der Explorer öffnet, nachdem man den Adapter eingesteckt hat. Von mir 5+ Sterne und ich glaube man merkt mir meine Erleichterung an.

GOOD二つ使ってます 現在欠品？もう一つ欲しいです

İşini layıkıyla yerine getiren, kaliteli ürün. Gönül rahatlığıyla alabilirsiniz.