F-GT Lite

I was pretty big into sim racing on Xbox with a wheel set up on a desk 6 or so years ago, and haven't touched my wheel in about 3 years. I decided To get it back out, and since I now have room for a cockpit, but didn't necessarily want it set up and taking up space permanently, I thought this would be a good option. I just set it up yesterday and only have about 4 hours of seat time, so I'll share my first impressions, and will update if anything changes. The Good: It had significantly less set up than expected, most of it is already assembled, and is pretty simple if you have the right tools (more on this below) It is very adjustable, but upon Initial set up I just kinda eyeballed it, and pretty much nailed it (gt layout) The seat is very comfortable for me, its not a plushy couch, but it gets the job done, and is great for what it is. The office chair i was using prior made my back hurt after about 45 minutes of continuous use, and I feel like I can sit in this all day and be just fine! I am about 5'8, and 270 lbs. So Im short and wide, but it fits me perfectly. It also feels sturdy while sitting in it. The bad: upon opening the box, I had a nut immediately fall out, thankfully I figured out where it went. Im a mechanic, so I know how to work with tools. The slots that the tubes slide into are very tight, which probably helps with stability and durability. However, it was near impossible to slide them in far enough for the bolt holes to line up. I tried pushing as hard as I could, beating it in with my hand/fist, even putting my entire body weight on it, and they still wouldn't slide in far enough to line up. Ended up getting a 5 lb hammer and a rag to protect my new purchase, and it didnt take much beating to get the holes lined up after that! Also, the included tools are your typical cheap throw away tools. They will work, but using a drill probably cut set up time by at least half. Also, as a tip, if you have a cheaper wheel like I do, and it only has a clamp on the bottom, you may struggle a bit to have the plate in a far enough away position to be comfortable driving, but close enough that it actually will clamp down, as a support bar interferes with the area below the plate, and may cause some spacing issues with the clamp. I have yet to attempt to completely fold it up, but it appears pretty simple and would probably take less than 5 minutes, especially if you've done it a time or 2. Overall, Im very happy with my purchase and would highly recommend.

First, I want to mention that if you’re limited on space but need a racing sim setup, this is pretty much your only affordable option. The plus side is that it’s a pretty good one. The overall quality is very good. The drivers position & adjustability of that position is also very good. Even with the racing gear attached to it, it’s pretty compact when folded. Just make sure you have a place to store or hang it out of the way. If you hang it, make sure the hooks are strong and attached to a beam/stud because this thing is not as “lite” as it looks but is still manageable. My 2 main negatives with this setup, though not really Next Levels fault, is the overall weight with everything attached and the fact that it’s hard to find a way to keep the wires for my g29 out of the way(they’re usually in the way of your legs/feet). To alleviate this, I just use twist ties to attach the wires to the bars on the right side once I’m seated. It would be cool if they could engineer an ergonomic solution for the wire issue. I did run into 2 smaller issues that I saw in some other reviews on Amazon for the gt lite. The 1st being holes not lining up quite right. I found the best solution that worked for me was to leave things loose or leave a gap between the 2 pieces as you put the bolt through. Then once you get the threads started, tighten the bolt & it will pull the pieces in alignment with each other. The other was the seat comfort. There’s no real/easy fix for the seat. I agree with the other review that it’s comfortable for a couple of hours but after that, my butt was starting to hurt. I will say for as compact & thin as it is, it’s pretty comfortable. The only other nitpicky cosmetic issue I had with mine was that the epoxy & stitching around the faux seatbelt slots was coming apart right out of the box.

This thing is great for the money. The engineering and ease of adjustment is just what I was looking for. I bought this to use in the Formula 1 seating position, and it is very comfortable. I am 6'-3", 210 pounds and was able to adjust it to perfection. The seat is comfortable, but it is a race seat after all so no, there is not much cushioning. The hardware for mounting the wheel and pedals was included in the kit, along with a plate to mount a shifter to either side of the rig (which I did not use). If you plan to use this for formula 1 seating, the bar behind the seat MUST be on the floor for it to function properly. This will lift the seat about an inch off the floor and will not allow the unit to lift off the floor when stomping the brake pedal. The pictures in the manual and on the box show the bar behind the seat completely off the floor in the formula position, which will just not work. Once I had mine fully positioned, I used a white pen to make a mark across the adjuster "wheels" so future setup will be very easy. When storing, I just removed the pedal mount and wheel mount bar (one bolt and two screws) and then folded the seat back up to store in a closet, which make s the wife very happy. Just make sure you have plenty of space if using this for formula 1 seating, as it is over six feet long..

Overall cannot complain with this chair. With multiple different sitting positions and changes you can make it really is an all in one. The chair is built with quality items, but being adjustable just means it has a little movement when sitting in it. Nothing too noticeable. I am a tall person at 6'3" and the chair adjusted to fit me well. Chair also folds down nicely to be stored, but does take some effort to do so. I ended up just sliding it out of the way instead.

This is a nice heavy rig that should last for a long time, but, there are some issues that you might want to consider before buying. First is that I had the same experience that some others have had concerning scratches and scaring on the tubing where paint is missing. I am not sure if they are just rough with these units at the factory but there were quite a few of these marks on the one that I received. Second is the machining was not the best as some of the screws were very difficult to install and for this reason, the tools that are provided were not adequate for me to complete the assembly. Some of the holes were misaligned and I had to completely remove the shifter plate and turn it around in order to get the Logitech g29 shifter to fit properly. while on the subject of the shifter, if you live in an area where you drive on the right side of the road and therefore will be placing your shifter on the right side of the rig, then you will forever be stepping over your shifter chord when entering and exiting the rig. Third is the behavior of the adjusters when folding the unit for storage and when setting it up for use. This is a major undertaking every time you perform these tasks. the unit is big and cumbersome and the adjusters are either tight or loose which makes things even more interesting as the rig is prone to collapse when loosening the adjusters to set it up or to put it away. Lastly is the sheer size and weight of this thing. It has a very large footprint when folded which can present problems when trying to find a place to store the thing... and it weighs a ton. I am 6ft3 and am a fairly strong person and this thing gives me quite a workout when I set it up and put it away due to the fact that it is heavy and bulky. For these reasons, I am reluctant to use it and it sits in the closet more than it should. If you can leave it out and only have need to put it away every so often then this might be for you, but, if you are looking for something to drag out and use and then put away afterward, you might want to look for something different.

UPDATE: Next Level Racing believes that I have received a second-hand/open-box chair through Amazon. FYSA, the item I purchased was (supposed to be) a NEW item and shipped and sold by Amazon, NOT a third-party seller. There is some, evidence to support Next Level Racing’s theory (the mounting plate had some scratches, the wrench that was supposed to be included was missing and, oh, all the other missing parts). Next Level Racing’s suggestion was that I pack this massive thing back and up return it to Amazon for an exchange. First of all, if I wanted to carry this thing, I wouldn’t have had it delivered to my house. I had to roll the box (end over end and very gently) in the front door as it was because, let’s face it, this thing is bulky and heavy. At least it is in pieces when you put it together so the weight, while awkward, is manageable, but hefting this thing back into the box (always a fun Tetris game with any return) and taking it to the post office, to some UPS store, or some Amazon drop center is a definite no-go. I would try to talk to someone at Amazon, but you can never actually talk to someone at Amazon so I’m pretty sure I’m stuck with having paid a retail sticker price for a second-hand chair that the manufacturer won’t take responsibility for (though I see their point on this one) and that, due to the logistical nightmare of a return and inability to reach and actual human at Amazon, I’ll just be stuck with apparently. Off I go to start begging the folks at the hardware store to help me find suitable replacement hardware so I can patch this thing together. Super… Oh I did manage to get the yoke plate on. Not sure the hardware is correct, but it works. Also included a picture of some hardware that was in the box. Absolutely NO idea what any of it goes it. It isn’t in the instruction manual “list of included hardware” or on the box anywhere and Next Level Racing didn’t send me any “you’re an idiot and that goes to [whatever component],” emails so I’m guessing they were stumped too. Just received this today. It’s part of a surprise for my better half along with with MSFS, and new Xbox, Velocity one flight controllers, rudder pedals, etc,, I just got him. Well, that’s shot now. This chair is literally unusable at the moment and since the TV is the monitor and the controllers are wired (a must), none of it usable unless we put it all on a TV tray and he sits on the floor in the middle of the living room. That doesn’t sound like fun. At any rate, back to this should-have/been gaming chair…a good chunk of the hardware (meaning nuts and bolts and screws and such) is missing including one of the installation tools. Even if my boyfriend could put up with not having the legs of the thing secured (and hopefully not falling over) the bolts for the steering wheel/yoke plate are completely missing, so it’s utterly useless. I’m EXTREMELY disappointed. I expected much better. I emailed their customer service so we’ll see what they choose to do about it, but I’m certain any response will take time and that will ruin everything I had planned so anything short of a new one here by tomorrow or the day after is too little too late.

Since I've seen some folks complaining about this in the reviews, giving it 1 stars because they didn't read the item description, let me start off with this: IT DOESN'T COME WITH ELECTRONICS, NOR DOES IT CLAIM TO. Now on to the item review: If I could, I would give it 4.9 stars, but that isn't possible, and it's closer to 5 than 4. The only complaint I really have is that the black on black construction of the pipes and joints makes it very difficult to see when the bolt holes are aligned, and as such makes assembly a little more tedious. So far, I have only used it in the GT setup. For its price point, it is an excellent starter rig for someone on a budget or someone low on space. I live in a small apartment and wanted an upgrade from the folding metal chair and wooden TV table that I had been using. It doesn't come with monitor mounts, but honestly that's totally fine to me as I race and play using my Oculus Quest 2 in VR. It is fairly comfortable, though I might suggest a pillow if you're going to be in it for a while, I spent 5 hours today flying passenger missions in Elite Dangerous and my rump did get a little tired of it. Sidenote: in addition to my Logitech G920 that I use for NASCAR Heat 5, Forza7 and iRacing, I've also been using it with my Thrustmaster T.flight Hotas One when I play Elite Dangerous, and it works very well, and I am designing a custom interchangeable mount for it.

Pros: - Feels very sturdy, plastic parts are good quality. Whole thing seems like it can take some abuse without damaging. - Set up/tear down is easy once you figure it out. Had to look up some videos on how to do it. - Very compact when folded up. Fits nicely in my closet. Very good if you don't have extra space to store the entire rig when it's set up. - Comfortable to sit in and adjusts nicely to fit my measurements. I'm 5'10" and ~190 pounds, can't speak on other body measurements but for me it's a good fit for extended periods of time. Cons: - The biggest issue I had and the reason I'm not giving 5 stars is the machining of the parts. The legs did not fit properly and the screw holes didn't line up. I had to file them down a bit and hit them in with a rubber mallet. I saw a video review and they had the same issue, so be aware of that if you buy this. Not a huge deal (took about 10 minutes) but for $300 I think I'm justified in expecting perfect machining of parts. Overall: If you're looking for a good quality/sturdy rig for your racing wheel setup that's compact when not in use, this one is definitely worth it. The only thing I'll suggest is buying a set of metal files and rubber mallet if you don't already have them.

Rapport qualité prix imbattable! Setup avec G923, solide, position agréable, reglable dans n'importe quelle position pour Formula et GT (Assetto Corsa, F1, WRC, ...)

Chair is great and comfortable to ride, setup is a bit tricky cause you can't set it up while sitting in it, but you have to get out, adjust, sit back in, get out readjust etc. Mine came with one of the plastic clips broken but luckily it's the smallest one at the feet, and that one you only need to adjust once. Once again the chair is really big and with the equipment on its heavy as well so take that into account. Overall i would recommend this product, i don't think you can get better for this price.

A few screws were loose in the box, and could have easily been lost. Took a while to assemble, but worth the effort. Very adjustable, and comfortable, and stable once set up right. Love it.

Répond a mon besoin ! C'est beaucoup plus agréable de jouer au jeux de voiture ! il a l'air plutôt robuste Petit point négatif : ce n'est pas simple de le replier

hay que ver el video para poderlo ensamblar, es muy resistente gran calidad de materiales y sencilla después de armar y desarmar unas veces le agarras la onda para ponerla y quitarla ya que el tamaño plegada permite guardarla sin estorbar si tienes donde dejarla plegada, buenísima para iniciar en el racing con tu consola. es muy comoda