FastFire 3, Model No 300235

I mounted this Burris FastFire III on my shotgun I use for turkey hunting and it has been a game changer. I love it. The dot is crisp and easy to pick up, even in bright daylight, and the automatic brightness adjustment works very well. It holds a zero perfectly, even after hundreds of rounds, and the sight picture stays clean and uncluttered. I really like the top mounted battery. No need to remove the optic and re-zero just to swap batteries. Controls are intuitive, and the build quality feels rugged enough for real use, not just the range. For the price, reliability, and performance, the FastFire III is a fantastic optic that delivers far more than expected.

I now own three of these. I got the first one for my turkey shotgun after having some focus issues with my eyes. I hate to admit it, but I am getting a bit older as far as my eyes and a couple of gobblers got out of Dodge when using my turkey scope and/or the vent rib. I researched forever trying to figure out if I wanted 8 or 3 moa and I am so glad I got the 3 as it doesn't cover up my target too much which forces me to aim a bit better. My turkey season last year was a lot more successful with it and after taking that pounding (my 12 gauge kicks like a mule) it still holds the first zero and I haven't adjusted it one bit. Next I decided I wanted to try one of these out on my new handgun; a Canik TP9SFX. Talk about quick to set up and zero, and start dinging the metal target I have. Before this pistol and this set up I couldn't hit the proverbial barn with any type of pistol. I don't know how many times I said I would never own a pistol cause I could never hit anything with em. The Canik and the FF3 sure changed that. That Canik came with just the right optics plate I needed and its just a sturdy, quality set up. I also just got a Taurus TX22 and after once again not being able to focus well on the rear, front, and target with the open sights it was just a no brainer to get the FF3 again. I mean you push the button once and it auto adjusts to the light outside. It has two other settings, but I have never needed them in any light, in any hunting situation, or any target shooting I have done. Hit the button three more times to turn it off. I like simple and dependable things. This is it. I have also never had a battery run out on me yet, but I do have some spares just in case. About the only thing I could ever say bad about it is to just be patient with putting the battery in it and tightening the lid as I can see how it would be easy to strip, but being able to not have to take the sight off the gun to put a new battery in it is well worth being careful putting the battery lid back on. And most sights I have seen like this have similar battery compartments if it is on the top of the sight. For me, this sight lets me continue to hunt and shoot the way I was taught; safely, accurately, and always in focus. I also never leave reviews so I hope that tells you something too!

I have used 3 FF III red dots for several years. They work each and every time and have had no failures. That is why i chose to get another. It operates a little differently than the older ones but the upgrades are nice. The dot intensity is now automatic but it also has three manual settings unlike the older model that required choosing the brightness you wanted. Our sunlight is intense and the dot is easily seen on summer days. This new one appears to be as good as my older ones. Another plus is the forever Burris warranty although I have never needed it.

It's a very nice red dot that works fine. Easy to mount to a Springfield XD Mod 3 - 4" pistol. Comes with the mounting screws to mount to the Springfield #1 base. Also comes with a Picatinny mount for other mounting options. My only complaint is the battery cap. As others have said, It's a PITA to get started on straight. I plan to keep it though because of the warranty and the Burris reputation.

This is one solid holosight. It holds zero with no problems. I'm using it on a very unusual caliber. The pistol is an RIA 22TCM100. The rounds are all tactical. They are like small "necked down" .223. Same casing diameter as 9mm. Which this pistol will fire both 9mm and 22TCM. Comes w both barrels. The mags hold either rd. The muzzle flash is monster. But does not impede the shooter. I ran 400 rounds through the pistol with the Burris attached. No problems. You will need to tighten it down. I'm looking for a smaller footprint screw to do a more permanent retention on the pic rail which I had installed to accommodate the sight. Even after it got hot, and **first** time at the range, the ready screw loosened. I used a penny to tighten it back up. Stayed on zero. stayed tight from there on. I forgot to bring the screwdriver that comes with the sight to dial in the MOA. Had merely bore sighted it at home and it was already near zero. I need to dial it in with just a couple fine minor adjustments and it'll be dead on bullseye. Like others here have said, it takes a couple tries to get a quick acquisition getting used to using such a small holographic. But once you're used to it, the red dot will come right to your eye. And for rapid fire shots, it works very well. I dim it a bit and that's just personal preference. I tried a cheaper holosight and like the saying goes, you get what you pay for. One had the front glass pop right off. A friend used another brand that was NOT cheap and it fell apart. Burris warranties these and stands behind their products as I did go online to various forums. The dot, like others explained is not (perfectly) spherical. But it's close enough to drive nails and it's toughness is what counted for me. On a pistol with a super quick 1911 comp reset trigger, that slide will cycle 18 rounds flying/dumping. So that this sight holds up to such rigorous movement is why I gave it 5 stars. I have other high end larger holos on rifles. I almost put the small Trijicon on this but wow it would've killed my pocket book. I'm very happy I saved my hobby funds and went with this. Although this is not inexpensive by any means, it's not $650-$800 either. It's a perfect happy medium. The guys at the range call it the "RoboCop" as this pistol cal is similar to a 5.7. But the blast is massive while the recoil is nill. I get a lot of curious folk whom I let give her a whirl. All smiles. As a nut for 1911 frames, I went this route over the FN and it was quite a bit less of a price tag.. It's a great set up especially now with that Burris. Yes. It'll be a good addition to any pistol set up as far as I'm concerned if you are wanting to use (this type of sight). I'm planning on using this for competitive match. It's not something I meant to carry. Although again, that's personal preference for your specific needs. Good product, good company. I have no complaints. Certainly recommend 👍😋🇺🇸 *See photos*

The dot is a little small for daylight use; probably better to go with the Fastfire3 with 8 MOA dot

My only gripe with this sight is how finicky the battery cover is. It was very difficult to screw the cap on without cross threading with the battery in place but once I got it together, the sight worked great and held zero no problem on my CO2 blowback airsoft rifle. The included lens cover is awesome, it just easily snaps on and off and covers both the front and rear with a plastic/glass. I am not sure how it will hold up to impact from a BB but it is a lot better than nothing. The auto brightness setting works great while transitioning from bright to dark areas and vice versa. I have high hopes for this sight on my firearms in the future.

Rettifico recensione iniziale...dopo un paio di sedute e relativa taratura, trovo che la caratteristica tanto declamata che indica la non influenza del parallasse completamente non veritiera,semmai qualcuno leggesse questa recensione mi convinca del contrario spiegandomi cosa eventualmente io possa sbagliare nell'utilizzo.....PS 347 €uro!!!!

You get what you pay for.

Easily adjustable, and holds zero on all the low-recoil arms I've tried. Did not try it on anything like a 12-ga pump, or 6lb 30-06 bolt, etc. Mounted on a rifle with the hood, it's been easy to use the sight, even in bright daylight. Mounted on any of my flat-top type rifles and it is too low without a 1/2" riser for a proper cheekweld. The reticle will shift slightly when you're not perfectly lined up with it. If you have a repeatable cheekweld then it's good enough for most people. There is a little white center-mark on the lower edge to facilitate this. Did not review sight on a pistol.