Tbest 1/10 RC Car Trailer, Metal Trail Car Trailer Accessory with Four Tires Fit for 1/10 RC Car

So as everyone else . No instructions. But very easy if your rc friendly . Every screw was there with a couple extras . I decided to use the longer bolts and spacers to give it a 1/2 inch lift . There's a video on YouTube where he uses them in the leaf spring mount . But there was other bolts that fit better and same diameter that came in it . Works better with it lifted it Dosnt drag your truck down as much with weight. Ohh and no I did not use lights . Due to all the bad reviews of fire hazard ..

Actually not bad for the price. The quality is fair and all parts fit together with no hitch. Pretty sturdy also. The only complaint I have is I couldn't saved some time with some instructions. Cmon I just paid a load of money and you guys can't include some assembly instructions? Took 40 minutes to put together

Loved it! Very well made. It arrived with a small issue. One of the bolts that conects the axle with the leaf spring it came wrong. Not a big deal, I replaced it with a normal screw/bolt. No assemble instructions but if you already built an RC is pretty much straight forward, nothing to miss. Good pakaged and all hardware well bagged.

For almost $200, it just seems like instructions could be provided. True, you could fumble through trial and error and eventually get it assembled. But, the trailer I received did not match the video. For example - the video shows lights on side of trailer - all four of my lights go on the rear. Video shows two sets of leaf springs - mine only have one larger set for both axles. 3 of my 4 wheels went on with no issues. The 4th - cross threaded. Had to get tap/die set and re-thread to make it work. Is it really that much trouble to print some assembly instructions and include with the thing?

Absolutely no instructions. The video in the description is not this trailer. If you are good at building things it's no issue. The hex nuts did not fit into the rims, way to big. I had some plastic ones for a slash that worked. I had to do do a lot of modifications to make it work during assembly. Material is decent, mine came with a dent on the bottom of the trailer deck. The lens covers for the lights keep falling out so you have to glue them in. The little circuit board wires for the lighting is very delicate and break off easy. The "battery box" is molded to look like a fuel cell. Makes zero sense on a trailer. The tongue jack works but you have to hold the bottom cause the grub nut doesn't thread into the shaft to keep the whole thing from spinning. All in all, I can't send it back cause I modified it, I wish I would of looked more into it and just went with something different. I would not recommend this to anyone. I gave it 3 stars cause of the material used.

So happy well built scale is perfect only problem nuts and screws tiny😂 but well worth it

I'm so sick of these manufacturers and sellers trying to make a quick buck by cutting costs to a point where the product becomes a safety hazard. I don't know about others, but my LED unit caught fire from two triple A batteries. The LEDs did light up, three out of four, but the fourth one was blinking. Most likely due to faulty wiring or soldering. But as I was about to take the batteries out, the wires caught fire. So, if you really want to buy this, then please note the following: 1) Many here had already stated that there are no instructions. But I found the photos uploaded by those who actually managed to complete it helpful as a reference. Google image search also helps. Not nearly as much as a comprehensive instruction manual, but better than nothing. 2) Before you do anything, check all parts for any noticeable flaws. And definitely test the LED with any spare AAA batteries you have to make sure yours is stable and does not end up like mine. Is it too much for me to ask whoever made this trash to at least put a heat shrink to cover the exposed connector at the back of the flip switch" You see in my photos how the wires are connected to the switch? When I was trying to disconnect, I accidentally touched the third thumb of the switch without any wire connected and ended up with a minor burn.

Super nice trailer! Wanted a trailer that would handle my Venom Creeper with HPI Rover 2.2s. This does it perfectly. Super easy build.

Me gusta tanto este artículo que es la segunda vez que lo compro. Lo pedí el día 1ero de abril y lo recibí el 04 de abril; es decir, sólo 03 días después.

It comes with no instructions or pictures for assembly. However it is not rocket science and if you have built a few kits in the past (especially Tamiya semis) then it is very easy. All the parts and hardware for each step are bagged together so it isn't hard to see which screws to use for each piece. I did have to shim the tail light housings with a couple washers as the spacers were a touch short to center them in the holes punched in the rear of the trailer. I also trimmed the plastic clamps that hold the LED's a bit with an exacto knife so they were not so tight on the wires at the back of the LED's. I had to flip the hitch plate at the front upside down to raise the front of the trailer some as it was sitting front low when hitched up to my 79 Bronco. Very nicely made and I am quite pleased with it.

Nada más falta que traiga instrucciones

“Instruction” sheet was an absolute joke, and for a different trailer. The nuts welded to deck for mounting the suspension were crooked and not properly aligned…very poor quality control

Pretty nice trailer for the price, the wheels are 12mm hex 1.55 alloy with alloy hexes. The ramps are total junk so you might wanna plan some new ones or at least a new hinge design like I did.. The jack post hangs kinda low and grabs dirt and stuff but for the price of trailers this is the lowest cost option. It comes with no instructions, so I’ll post a pic of a finished one so other buyers can see how to assemble it, I suggest running the small leafs on top and letting the wheels rub the fenders because it’s sits a little high, something like 1/8 scale probably. I added the winch. It’s a great trailer if your not too picky and don’t mind some messing around to make it right.