Lighter Inserts

Wanted to share how much i like these new lighter inserts. they fit perfectly into my existing Zippo and work reliably every time I use them. I've tested them during trips and even in everyday tasks like lighting candles or starting a campfire. it's nice knowing i don’t have to carry a full lighter all the time, just swap these in when needed. definitely a handy upgrade that makes parts replacement super easy and quick.😊 feeling pleased with the quality and convenience so far. will keep using these for sure!

I have purchased this same insert 4 times now and it is AMAZING. It is not only perfect for my Dragon Armor Series Zippo but if you know how to properly drain excess air and fill it then it will light every time. I've had a few and have found that they can last between 2 and 5 years, depending on usage,before the Piezo ignition goes out. All in all this is absolutely genius and will definitely light in ANY wind

after googling a quick fix it works now!!! it is out the package basically not functional, but you can fix it easy, a little pricey for what it is, but it does work good and have a good warranty.

Seems like these lighter inserts work well for everyday use, especially when you're out camping or just need a quick light at home. I like how easy they are to swap into my existing Zippo. However, they don't last very long before needing a refill, which can be a bit inconvenient if you're in a hurry. Still, they’re a handy backup and save me some money since I can replace just the insert instead of the whole lighter. Overall, a decent purchase for quick lighting needs but could improve on durability.

I bought this butane insert over 4 years ago and it never really worked that well. I tried the suggestions to remove the limiter, etc... and then the thought occurred me to recently to adjust it without the limiter. This worked. I was able to find the minimum point where it would stay barely ignited. Then turned it until it was using fuel too fast. Then backed it down to find a good sweet spot. Then I re-inserted the limiter based on this. Now it easily ignites and stays on, and repeat ignitions are 100% reliable. I no longer have to worry about the Zippo fuel drying with the old wick setup. I can also buy Zippo butane fuel relatively cheaply at my local store. If yours doesn't ignite properly, stay lit, or uses fuel too quickly - I suggest playing with the adjustments with or without the limiter to get it to work.

I found these inserts to be pretty handy when I wanted a quick switch at work. They light up reliably and seem to last well. Plus, it's really convenient to keep a couple in my pocket. The quality feels good, and I’m glad they work so smoothly. Perfect for anyone who needs a dependable lighter on the go.

I really like this lighter insert that I purchased for a non-Zippo lighter. It fits perfectly inside the case and functions well with the lid. I also put it inside an actual Zippo lighter that I have and it fits perfectly inside it as well. The lighter itself seems sturdy, looks really nice and produces a torch rather than a flame. I have noticed that I usually have to click the ignitor at least twice if it has been setting unused for a while. It’s quicker, easier and cleaner to fill with butane (sold separately) than lighter fluid and doesn’t appear to take much butane when refilling. I’d highly recommend if you’re looking to upgrade.

First, let me say I have been a loyal Zippo user for quite some time. I have used - and worn out - any number of Zippos over the years. The classic flint, wheel, fluid style lighter has been in my pocket for a long time. Seemed like, as an acquaintance of mine said, there was always something I had to do with those old classics. I was fiddling, it seemed, with my lighter more often than I wanted to. So, I went in search of something a little less maintenance intensive. Or so I thought. Enter the Zippo butane insert. I thought with a butane insert, built in igniter, fill it, and go. No more dealing with flints or over filled fluid tanks. Right? Not for me. Full disclosure, I did not have "premium" butane on hand when I bought this insert. I'm still not convinced that "premium" butane makes that big a difference on the problems I've had (though, I bought some in my journey with this lighter insert). Out of the box, and after filling with butane for the first time, it worked ... okay. Couldn't get a good flame height out of it, though it was reliable in lighting. Went online, found the "modification" videos out there on this problem and made the mods. Wow. Had to be careful I didn't burn my nose off. Now I'm happy, adjusted the flame just right and burned through my first tank of butane all hunky-dory like. Proud of my fancy Zippo butane lighter. Second fill is when the finicky aspects of this insert began to rear their ugly head. Did my second fill. In my search finding the fix to the flame height issue, I discovered that one must purge the tank of air before filling. No biggie. Purged it. Fill for 3 seconds. Purge. Fill for 3 seconds. Purge. Let sit for a few minutes. Go out back for a smoke. Won't light. I'll get it a flame, which then seems to blow itself out. But no steady flame. Adjust flame height screw lower. Same result. Lights up when I light it with another lighter. But, won't ignite itself. Baffled, I set it aside and used my backup lighter. Next day, on a whim, I pick it up, and lo and behold it worked! Lit first time, and worked fine through a tank of butane. Which lead me to a cycle of going 2 or 3 weeks of perfect performance, and then after a fill the insert being stubborn and not wanting to work. Sometimes, I would get an initial light off which wouldn't last. At some point in this process I did buy "premium" butane after having done every "fix" I could find on the internet. Look, I've made my living over the years off of fixing stuff. Building stuff. It's not like I'm not mechanically inclined. Working with my hands and making stuff work is who I am. Zippo, it shouldn't be this hard. I've had this lighter insert for just over a year. A little over half of the time, it worked just fine. The other half, I had to fiddle with it, re-purge it, set it aside for a day, whatever. What I've found is that every fill cycle I just don't know whether it's going to work or not. I had two, three months of good use after switching to premium butane. Really thought that was the solution. Then, I dropped the lighter. It bounced off a 2x4 on it's way to the ground. And just like that, the problems have returned. It'll light once, and then ... nothing. Set it down, walk away, come back in an hour. It'll light once and then ... nothing. I've adjusted the igniter probe (for lack of a better thing to call it) and got a week's worth of pretty reliable use out of it. Filled it. Now, nothing. Will light if I put another lighter flame to it. But, not on its own. Zippo. It. Shouldn't. Be. This. Hard. Is a year the average lifespan of the igniter on this thing? I don't know. Because I have now determined that has to be what it is: An igniter problem. Paying nearly $20 for a years use of a butane lighter seems a bit expensive to me. Especially when I can buy two Bics to get me through a year for a fraction of the price. Or, just go back to my fluid insert. I gave this thing 2 stars only because when it works, it's the best lighter I've ever owned. Wind resistance is excellent. Flame height easily adjustable. I deducted 3 stars because in the 14 months I've owned it, I've had to fiddle with it far more than any other lighter I've owned. Since I still have a 3/4 full can of premium butane, I'm probably going to buy another one and see whether premium butane from the first use on makes a difference in reliability. I will say this, though. When YouTube is full of videos of people telling you how to get around design flaws just for the privilege/prestige of owning a Zippo ... it doesn't inspire confidence. Update: Decided to order another one of these. Smart decision. Right out of the box, and after filling it, it has worked like a champ. Flame height adjustment was good out of the box. Reliable lights. No modifications necessary. Good right out of the box. Have used the latest through a handful of refills, and still works like a champ. Just like a Zippo should. Manufacturers deserve criticism for when their products don't meet standards. They also deserve credit when it appears they've listened to consumers. It would appear to me they have fixed the problems I, and many on the internet, had been encountering. Kudos to them.

Its a zippo

perfectly fit into zippo lighter

Güzel duruyor ancak elimdeki zippo boş kutularının içinde biraz küçük kaldı bendeki şeylerde sorun olabilir şuan için çalışıyor ve güzel duruyor.

Come si legge negli altri commenti i punti di forza non sono sicuramente la durata della fiamma dato che comunque la quantità di gas è limitata (è uno zippo non un cannello a gas). La durata va in funzione anche di come è stata regolata la fiamma: troppo gas infatti rischiate anche che la fiamma non si spenga subito; poco gas non si accenderà al primo colpo e la fiamma borbotta fastidiosamente. Personalmente l'ho preso in quanto fumatore di sigari quindi lo uso di rado. L'idea è magnifica perché mi permette di utilizzare zippo che non utilizzavo da tempo. Chi fuma spesso ovviamente consuma molto più in fretta il gas al suo interno con la noia di dover ricaricare più spesso. Ultima cosa: ho trovato abbastanza difficile inserirlo e rimuoverlo dalla sede degli zippo. Spero che con il tempo si consumi un po' e ne renda più semplice lo smontaggio e il rimontaggio

Really upsetting to pay such a high price for a product that works only for a month… what a waste of money! Return window was closed by the time it stopped working. Stay away from this item.