Amber Reflector

I ordered this to replace my 2008 AWD IS250 headlight assembly lamps where the plastics are pretty much yellow and even after using one of those headlight cleaners/clearers. The product came in and had it professionally installed. It came out really good but forewarn that it is not fully fitting. there will be some gaps on some parts and I won't recommend forcing it. Otherwise you may crack the plastic housing. The headlight provided a very unique look unlike any other one out there. I love the LED look and the check mark running lights. The headlight checkmark run on daylight and also two of the LED will also run on daytime running light. But it flickers (a really fast one) due to lower voltage. The flicker itself really doesn't bother me too much and to me i thought its pretty cool when running it during daytime. You can however turn off your daylight via toyota tech stream software that you can run on windows with your laptop. Originally I would have given it a 4 stars until I had contacted their support. The issue for me was that the passenger side of the headlight...i noticed that there was a white plastic inside the headlight unit where the otherside didn't have it. It was definitely a manufacturing defect. At first I was thinking to let it be but I keep seeing it and also preventing me from adjusting the headlight up/down. So i had contacted the Vland support to help out. Their support was topnotch and I sent them the picture of the issue. Nini the person that helped me out took care of me. Had formed up a replacement for that side of the headlight and came all out of his/her way to replace it for me where the shipping was coming from China. It took almost a month to get the replacement but it was so worth it. Once I got it, I replaced it and voila!!! I can now adjust the light height! All in all, thanks to Vland support and Nini for getting all these sorted out. That's when I gave it a 5 stars. I get a lot of compliments on my Lexus and how unique the headlight is.

Fits perfect on Lexus IS250 (2010). Instant upgrade look on the car. Installation was easy for an experienced electrician

Visually one of the best upgrades I've seen to bring the car up a decade! I've been waiting a while to write this to be sure they work, stay dry in heavy rain, and last. So far, a great addition! Some install notes- the fuse box that you need to insert the jumper fuse into is listed as "on the driver's side". I initially thought it was the fuse box inside the car on the driver side and was pulling my hair out trying to figure how to get a wire through the firewall. Good news, it's under the hood just behind the driver side headlight. You will have to cut a small notch in the fuse cover so that it still closes after you install the fuse jumper and lead the wire out of the box. Also, these lights will NEED to be adjusted once installed, but getting to the gear to actually adjust it using a socket or wrench is IMPOSSIBLE! I managed to adjust it using a flathead screw driver and tediously pushing the gear in the direction to raise the beams. It takes forever to get them where they need to be, as they come out of the box facing directly down in front of the car. Be patient and take your time. It's worth it! Once adjusted properly they are way brighter than the factory HIDs. I adjusted them at night against my garage door and then drove it to ensure they were up high enough without blasting oncoming cars. From looking at the previously posted reviews, no one ever posted a picture of the "Gap" between the headlight assembly and the fender. I provided a pic of the gap and the adjuster gear on this review. Hope it helps in your decision to proceed with it and what you'll need to do to install them. Removing the bumper is a must to get to the mounting screws but there is a great video on YouTube that shows all the steps and bolts you'll need to get at to get it off. (Video was for another headlight product but the info was great). Pics also provided with after the install, including changed out amber fog lamp LEDs. I think the trouble people have posted about flickering and dimness may result in trying to replace factory Halogen Bulb assemblies. This review was for a 2010 IS250 with factory HIDs and the AFS system. The instructions provided also show which fuse to remove after installing the headlight to turn off the AFS warning light that will come on once it doesn't see it's original factory assemblies present. Very happy with the look and functionality with these lights!!

Right off the bat an absolutely hands down gorgeous product. This can't be understated. The flow of the led lights and the animation for the start up and turn signals are gorgeous. The headlights were incredibly easy to install with very little issue especially if you have prior experience. But all of this comes at the cost of visibility. These headlights barely produce enough light for me to see 2 car length in front of me, even with the high beams there isn't much of a difference. God help you if you have any form of tint on the front windshield like I do though. Now granted they do provide the ability for adjustment and what not, but for the cost I should be able to see just as far if not farther then the stock lights. Especially considering they are competing with a headlight design dating back 10 plus years now! Aside from that it is a great pair of headlights. (Also needs to be paired with the 4IS bumper in my opinion if you chose these. Gives the car an incredibly modern look!)

Easy installation! They look amazing! Great quality! I can see everything much clearer. Perfect fit for my 2007 Lexus IS250

DRLs do not work. Check mark is only a turn signal. Doesn’t even stay lit when lights are on. It looks like I have an Acura since it doesn’t have the iconic check mark Lexus normally has. Deal around lens is barely holding together. If I wanted to exchange or return, I would have to pay 140 to have the bumper taken back off and have lights to replace it with and wait for your lights and pay another 140 to have the new ones put on.

Fit very good and lights up very bright

Headlights and taillights took me about 3.5 hours, but I took my time to prevent damage or scratches. Received compliments from friends, looks great for a 15 year old car. I carved a small notch for the daytime running light cable in the fuse box, everything turned out perfectly. Really happy I took the chance and did this myself.