ArmorSuit [2 Pack] MilitaryShield Screen Protector For Samsung Galaxy Note 10+ Plus (6.8 inch Display)(Case Friendly) Anti-Bubble HD Clear Film

I had confused this screen protector with another company's tempered glass screen protector. Instantly, I noticed that this box was not the right shape or size to be able to hold a glass screen protector large enough for my Samsung Galaxy S20 ultra. My husband, an Air Force Vet, pointed out that the screen protector offered "Military grade protection" and was backed by a lifetime guarantee, and suggested that since I keep my phone in my back pocket, (I don't carry a purse-unless absolutely necessary.) military grade protection is what I should stick with. Inside the box there were 2 packages and 1 spray bottle with a clear liquid inside. Both packages were sealed. The large packaging containted the screen protector that was protected by a thicker plastic sleeve, and two pieces of high quality paper. The first sheet contained simple, clear, and easy to read instructions with a link to an installation video, and a contact email and phone number to reach out for assistance, if needed. The other paper explained the warranty and gave a satisfaction with your purchase paragraph, printed with the same simple, clear, and easy to read set up. The second packaging held a microfiber cleaning cloth, about the same size as one you would use to clean your eyeglass lense with and a rubber squeegee. I only had to watch the short video once to understand how to install the protector. The video was clear and bright, and the voice over was easy to understand. I am not very good with lining up screen protectors to match the cut outs correctly, however, this did not affect my ability to install it perfectly. The liquid inside the included spray bottle made it super easy for me to readjust the film until I was 100% satisfied with the placement. The directions even explained how to ensure the film would adhere to the curved edges of my phone's screen. After installation, I left my case off of my phone for the specific time frame the directions gave so that the film could set around the edges too. There were absolutely 0 bubbles- literally zero. It has been a few weeks since I installed the screen protector and the phone has been transferred back and forth between two different cases. Still not a single bubble, no lifting edges, no yellowing of the film, and best of all, no cracks in screen! I have not had a single issue with my fingerprint reader or its ability to sense and read my fingerprint. There are no mistouches when using my phone either. (I do usability testing and have my touches visible for when I screen record, so I know with 100% certainty there are no screen issues. I am so thankful that I took my husband's advice and stuck with Armorsuit. This is the best screen protector I have ever used, both with quality and affordability. I wish I had found them sooner! I am definitely a customer for life!

So far it's amazing. It took a little time and effort to install. Because of the edge on the galaxy phones, you will have to keep pressing the edges down until the liquid dries and the adhesive bonds. But it turned out better than I could ever expected. It's honestly not a grippy as I read it would be. My finger slides smoothly across the surface. I haven't used it much since installing it so I can't vouch for longevity, but it is definitely scratch resistant due to the fact that it is a film instead of glass. Those glass protectors dont last at all. They crack so easily, unlike these. But I do expect if you were to Hit or scratch it it would tear the film. The edges have not began to come loose yet after 3 months, but it has been in an OtterBox. I had a cpl very minor scratches on the screen before installing and it seemed to seal them up. I can't see them now! Which is pretty cool. Fingerprint scanner works fine. No issues. All in all, for the price and warranty it's unbeatable! And it's something you can easily install yourself if you have the time. Also make sure the screen is clean before install or you will have bubbles!

Why you should buy: -Unbeatable screen protection option for the price -Easy to install -No residual bubbles -Great adhesion to screen -Great case compatibility -No problems with fingerprint recognition or SPen usage Why you wouldn't(?): -Not a glass protector (read below for more on this) -If you really count on the self healing abilities to be miraculous Detailed Review: Since cracking my galaxy s8, I had only purchased glass screen protectors for my s9 and now my note 10+. My last screen protector I had (a whitestone dome) got a crack on the edge of it due to my 'carelessness' of putting my phone in the same pocket as my keys. Granted, I was very happy that it wasn't the screen on my cellphone that costs as my last Alienware I purchased but not happy that it was the second time this has happened to me. As I didn't have a bunch of spare cash to shell out on another screen protector just before Christmas I sought out a much more affordable alternative. Enter the ArmorSuit. Admittedly the two things that drew me to this item were the price and the fact that it WASN'T a glass screen protector. Because of that last point I wasn't worried about case compatibility, problems with the fingerprint reader (a big deal since I use the work profile and pay apps on my phone), the thing popping off my phone with slight amount of force (*COUGH AMFILM COUGH*), or getting a crack from sharing the same space as my car keys. Again, stressing the price point on this screen protector you really can't go wrong with it. I think it was under $7USD when I got it and I even got an offer in the box to get another protector for free by registering it. Along with the inherent benefits that go along with a film screen protector, there are some other good pluses for the ArmorSuit as well. Installation was very pleasant (and welcome!) after the whole circus you have to do with the likes of the AmFilm Ultra and the Whitestone Dome. I had no problems with it and you really have the ability to freely move it around on the surface of the phone as needed. The product description says that it ends up being bubble free and it's true. After less than a day there weren't any remaining. That adhesion is really, really good. Having used plastic screen guards on smart devices since the early 2000's, it was nice to finally come across one that neither leaves any bubbles nor curls up around the edges. That being said, if you need to remove it for whatever reason you can do so without much effort. Though I can't 100% promise you that this screen protector will absolutely work with XXXXX brand YYYYY model case I would be extremely surprised if it didn't. With glass protectors it is almost always the reverse. I really can't say that the ArmorSuit negatively impacts the fingerprint reader at all. If anything I have to say it reads much better than even the best glass protectors. The SPen works flawlessly with it which is essential if you use fully use it as intended (which I do). The elephant in the room, though, is that I really am not going to say that if I WERE to have my note 10+ (not insured) drop screen side down with only this to protect the screen that it would come out fine. Frankly, I doubt it would. True, my glass screen protectors would either pop off or shatter BUT in either case I would feel really pretty safe about the outcome about my actual screen. Yeah, I'd have to go through the hassle of paying for shipping for a replacement protector or flat out buying another one but even $60 (worst case) versus $300 to $500 for a screen replacement is a no brainer. That being said, ruling out drops or high force impacts I feel it gives very good protection for the medium it uses (regardless of the price). I do question how well the self healing properties of it work though. I put a fair amount of pressure on my SPen when I write and I can see artifacts written into the screen protector when an external light source hits it just right. Under normal usage it isn't noticeable at all and as I said earlier it doesn't affect the SPen functions negatively at all. Bottom line, if you're really careful about taking care of your phone and you do have insurance on your phone, seriously just get this screen protector and call it good. You will not get a better one for the price period.

I swear by these screen protectors. They are not the easiest to install, but they are the BEST once the install is complete. The installation accessories and documentation are good quality. They refer you to the manufacturer website to view a nicely detailed installation video which was easy to follow. I highly recommend watching this before doing anything. It instructs you to spray the solution on your fingertips and both sides of the screen protector then move it into place and squeegee the liquid away. It was incredibly simple and it worked fantastic. Now since we have curved edged phones you have to wait 15+ minutes then push down the sides. Here is where it takes some time and effort. You just have to keep working that edge down. They recommend a hair dryer if you're having trouble but I didn't need it at all. You just need patience and have to keep working it until eventually it stays down. I don't know if it's the method employed or the material that they use, but these protectors always come out perfect every time. No bubbles on the first try every time. Go figure! I even did the entire installation mostly one-handed (I'm handicapped). They only give one protector in the package, but they had an insert that says they will mail you a 2nd one for free. Awesome! I'll follow-up with an update if that turns out to be anything disreputable. They are made in the USA with a lifetime warranty. The quality is excellent! It's thin, yet very strong and doesn't interfere with touchscreen operation in any way. You can't tell it's there for the most part. I have nothing really negative to say about this screen protector. The installation takes a little time and elbow grease compared to other screen protectors, but it isn't difficult at all and has tons of room for forgiveness compared to other installation methods. I would highly recommend this product to my fellow Amazonians.

Installation was okay, but this is a wet install, which should be a breeze. However, the bad thing about this product is when dust somehow gets onto the protector during installation, there is no way to remove it. You can't rub it off, use a tape, use a finger or a sharp object to scrape off a particle. It's just stuck on the film and you have no choice but to stick it on your screen with those dust forever stuck and visible. Dry install films are easier for me, for this reason. Having a curved screen, a wet install is still best way to go for the film to hug the screen, so I really had no choice. I also hate the way the screen protector feels. It's rubbery in texture. And longevity-wise, I need to replace the protector every few months because the scratches get annoying (this is based on my other armorsuit installs on previous phones). Finally, for this specific phone model, I hate this screen protector because it doesn't cover the entire screen. There is a gap on my screen that isn't covered by the protector because I was aligning the thing on the front camera while the phone is off. When I turned on the screen, I realized the screen protector must be aligned to the last millimeter of the bottom of the lens, just shy of covering the front lens, to be able to cover the actual display on top. This doesn't really solve the gap on the sides though. The cut out isn't as good as on other phones. This particular model has a longer bottom, covering the display plus a couple of mm below it to the black border, while leaving the top part with a gap. On both sides, there is 1-2mm gap on the display that is left without a screen protector. It isn't as visible when one is looking on the phone straight on, but from the sides, it's clear that the protector is a tad too small. The note's pen does not glide smoothly on this screen protector. It also doesn't register as precisely. It is a cheap screen protector and the quality shows.

First, let me say, regardless of all of the negative reviews, and yes, I read them, this is a good screen protector! I was concerned by 2 things - how thin it was, and the fact it had no curved edges like my Note 10+ 5G. However, it's most important to watch the installation video! Honestly, like most, after watching the video the first time I didn't believe this protector would conform to my phone, but, as I titled this, "Be Patient!" The video seems a bit quick. However the instructions are detailed and I was fortunate to have another device to play it back as I installed it on my phone. The spray solution makes things very slippery! That's a good thing! Make sure to have clean hands and a clean workspace. I used a clean hand towel on my kitchen table, where I had plenty of light and little to no dust. I allowed for the 15-20 minute intervals of time for the solution to dry, both after aligning the screen protector, and then, bending the edges to conform to my phone. The "edge" step was the most patient needed part of the process. I'll submit my own side advice here: make sure your fingers are warm! It helped me tremendously to go very slowly, starting at the middle edge and slowly working towards the bottom. I know now, I should have made a video to help you understand what I did. Trust me, this is tedious, however by using plenty of solution and the provided squeegee, I have ZERO bubble, and NO trapped dust underneath any part of the protector! Once it dries, the protector "hardens" in place. The sensitivity I equal to the original glass, and the fingerprint sensor work perfectly. I was able to program new prints and read old prints with equal precision. 5 stars for quality. 4 stars for ease of installation.

These are great screen protectors for a curved Samsung screen, BUT, they do seem to reduce the touch sensitivity. The bubbles go away fairly quickly and the corners don't come up like other spray and stick on protectors. It is resilient in that small scratches self heal. My recommendation when applying them is to make sure your phone is on a non slip surface as it helps to make the alignment and application much easier.

I got the ArmorSuit MilitaryShield to replace the screen protector that came on my Note 10+, which is apparently scratch attracting rather than scratch resistant - I got my phone around the start of the pandemic, so I rarely pocket it, and the Samsung protector is just covered in visible scratches. The ArmorSuit is a whole different story. I *HATE* installing screen protectors, for the same reason I hate applying the stickers to toys that I put together for my kids: I seem to be genetically unable to get them on straight, and bubbles are usually a fact of life. I know that makes me sound like I suffer from a crippling mental disability, which I promise is not true, despite what most people I meet think. Well, ArmorSuit points you right to videos that clearly show what to do, the best ways to do it, and what to do after. I took some deep breaths, did some calming meditation, put on my war face and got to work. In the end, even I was unable to mess the application process up. Everything was where it should be and crystal clear. I couldn't really believe it. It is now coming up on 2 months, and in stark contrast to the protector that came with my phone, I do not see any visible scratches or bubbles on the ArmorSuit. Nice! The edge of the protector is barely tangible, which is exactly why I prefer it to tempered glass, AND it covers the curved screen edges of the Note+. It is also very nice to buy something on Amazon that is made in the USA to a high standard of quality. Love you and all China but when it comes to protecting the amazingly expensive phone that is my constant companion, you aren't my first choice. I will definitely be buying ArmorSuit in the future.

Usually I get tempered glass screen protectors however I went with a review where this was one of the top listed Installation was easy, didn't have to worry about not having a perfect alignment as long as you follow the instructions (which it provides via a qr code / youtube video). It does recommend you wait to do it overnight so it has time to sit and seal. After following instructions (leaving the phone off as well and sat for roughly 24 hours if not a little shorter in time) it properly sealed to the phone. No bubbles at all. This is still one of the easiest phone screens I've installed without having to take it off and realign and risk getting things stuck under. So far no smudges have stuck to the phone screen. And it reads fingerprints with no issue. Didn't have to readd fingerprints (even though it suggests to do so) Definitely would suggest this screen protector