Bgears b-Voguish Gaming PC Case with Tempered Glass panels, USB3.0, Support E-ATX, ATX, mATX, ITX. (Fans are sold separately)

Wow. This case has gone beyond my expectations and is an absolute steal. The tempered glass front and side panel are prestine, and they don't feel cheap at all. The screws that come with the case are also high quality. Screwing in the SSD or the Hard Drive were a breeze. The mounting on the power supply was no trouble at all. The cable management on this case is extremely easy because there are plenty of places to zip tie cables togethe. Not to mention, the bottom shroud hides the cables insanely well also. There is room for 9 fans, so I went ahead and installed fans in all the slots. With so much room in this case there are endless ways to customize and add cables without the worry of running out of room. If you're looking for a great case, get this one. Your build will not only be clean, but look amazing through this case. I would 100% reccomend this to anyone building a new system.

It doesn't come with fans ,but for the price it is still well worth the money. A comparable tower would cost at least 25% more. Tempered glass and metal. Bottom where PSU goes has a cover. Inside is designed for great cable management with space in back for excess wiring and a lot of openings for all the connections. Leaves a very clean look once build is done. Has good airflow and plenty of room for ATX mobo and full size GPU,PSU. Very sturdy and would make any build look good. Easy to work with. I put three fans in the front, one in the back. Core i5 and RTX 2070,600 w PSU, works great and temps are real good.

I got this case purely based on aesthetics. I had no goals for performance and didn't even consider how hard it would be to setup. I have the case fully set up with my new Ryzen 5 3600 + 1660 Super + a fan for literally every spot in the case. It was a true JOY to work with. It's beautiful looking and even my wife who thinks this stuff is stupid said "wow that is a nice looking computer". I have no regrets and would absolutely buy it again. It was so easy to set everything up and it holds very decent temps. If I was to mention ONE bit of a feedback? I'd say the front panel should be an additional 2mm away from the case to give a liiiittttle extra air flow on the front intakes but even that isn't an issue really. I used a Cooler Master 212 RGB Black Edition cooler and my temps average between 50-60 C while gaming and it RARELY hits higher than that. So maybe if you're running a stock cooler you might have some higher temps but even when I had the stock Ryzen cooler I wasn't exceeding 75 C very often (literally peaked at 79 once and that was while running a stress test and that was the stock cooler which isn't great in any PC case) If you're on a budget and want an r/battlestations worthy case - this is it.

For the price, this is a great value. The tempered glass looks nice, and the case is pretty well made. The metal is a bit on the thin side but that shouldn't matter as long as you're not forcefully pressing against it. It doesn't come with a manual but the parts it comes with are mostly self-explanatory if you're familiar with cases. You will need to either use a low profile CPU fan or liquid cool your CPU, since the case is too thin to accommodate vertical CPU fans/heatsinks. Also, the front glass will eventually accumulate dust on it, but it unsnaps pretty easily to clean. Another important point if you decide to get the one with preinstalled fans (and fan controller) is that the fan controller requires an ARGB (JRAINBOW) connector on the motherboard. My MSI motherboard doesn't have that, so I can't control the fan speed or color from software, and have to use the little remote control that comes with the case. It works, but I'd prefer software control from within Windows rather than a remote that can be lost or misplaced. Overall, it's decent quality for the price point, but I'd recommend getting the model without fans included, and spending a bit more on 3rd party fans and controllers that you know will work with your particular motherboard.

This is the easiest and most spacious case I've built a computer in. It doesn't look too big from the outside, but it has ample space for cable management and accessories and it feels very solid. There's a fair amount of space above and below the motherboard, making it easy to access the screws and plug in cables. The massive cable cutout next to the motherboard is very nice too. It has ventilation on all sides with a filter on the top and bottom and I can immediately tell that it has much better airflow than my old case, partly thanks to the 6 included fans (my old case had 4). The included RGB fans look great behind the tempered glass. The fan controller is nice (supports 10 aRGB fans + 2 RGB accessories), although it uses 6 pin fans and the speed can only be controlled by the remote control (as far as I can tell). It does support a hardware switch to change colors, but that isn't included (you could wire the reset switch to be the color selector instead). There is also a motherboard sync port which seems to be a 3 pin RGB input for color control, but again, the cable isn't included. The 2 led accessory ports seem to be standard 5V RGB headers, but you need small RGB to standard RGB adapters. The accessory bag is pretty nice, it has an assortment of different screws, including radiator screws, along with a buzzer, and blank expansion plate. I wish it included the RGB adapters for the fan controller because they're somewhat hard to come by, but I was glad to see so much variety in the included parts. Finally, the case comes with no documentation and there doesn't seem to be a manual online either. It's fairly straightforward, but it was a little hard to tell what screws are meant for what, and there are no details about the features on the fan controller. Overall, for the case, plus 6 aRGB fans and a 10+2 fan controller, it's an amazing deal. While I wish it came with a manual, I'm very happy with the purchase and would definitely buy it again

el gabiete esta bien pero no trae los ventiladores

good looking case not overly expensive amazing quality

I'm quite impressed by how above it weight (litteraly in that case) it punches. I've built my fair share of computer using far cheaper cases and far more expensive cases. It blows anything under a hundred bucks in terms of functionnality and ease of installation while almost holding up to my Fractal design. I just wanted to buy a cheap case for a computer that had to be in plain sight so I also wanted something that would look good and it's perfect for that. The good : - Easy to build in. It was a brease. Large space at the back for the cables, large cut out and mostly good placement for the rubber grommet. - Looks good. - Plenty of mounting hardware. Albeit no case fans so make sur you have that. - Fun to build in - Spacious, there's place for a 240mm rad at the top with enough clearance to run the cables, I had also enough space for a bigger hard drive cage to use it as a NAS. The bad : - Build quality is subpar. Paint chip off at the edges, feels awfully light when you take it out the box. Break out pci-e cover (they do include a replacement which I like). - It's a big case for it's class. Wider and taller. Makes it easier to work with but it's taking a lot of space. - No instruction, guidelines or whatsoever. You're on your own. Not a problem if you ever build a computer before but make sure you watch a couple of videos if you haven't. - Front panel is weird to remove and requires to much force I'm willing to put on such a slim tempered glass panel All in all, I'm pretty satisfied and all the negatives are outweighted by the fun I had to build with it and the low price.

بدون مراوح

Très bon article