Klein Tools ET140 Pinless Moisture Meter for Non-Destructive Moisture Detection in Drywall, Wood, and Masonry; Detects up to 3/4-Inch Below Surface

The Klein ET140 it’s very accurate and super easy to use. No pins means no damage to materials and gets quick, reliable reading perfect for wood drywall and more. This is a solid tool. I highly recommend.

I purchased this to detect moisture inside of my home. It works great and is a simple tool for even a basic DIYer. The device is easy to read, the brightness of the display is just right...especially in dark places. The price is good, given that Klein is a very reputable brand with quality tools. I was able to scan all of my walls and detected another area of high moisture that I was unaware of....unfortunately! Definitely a useful device to see what is happening on the inside of your walls.

Klein tools have always been my go to for accuracy, durability, and quality. This tool works great to test moisture in your flooring and drywall.

We rented out our house for the last 15 years while I was overseas. I recently remodeled the bathrooms, recently the one bathroom always smells damp. The last thing I wanted to do was tear up the bathroom again. I decided to try this moisture detector. It came fast, had a good price and is really easy to use. But I kept wondering if it is actually accurate. I did a video that shows everything below. I decided to do some tests with it. It has 2 meters, one shows you the percent of moisture and the other is a green to red/dry to wet moisture indicator. It also has four different modes; drywall, masonry, hardwood and softwood. First I set it on the drywall mode and tried it out on my wall. The moisture indicator didn't register at all and it showed anywhere from 1% to 5%. This seemed like quite a range and had me wondering if 5% was good or bad. I knew I needed to test a couple of scenarios. I got a piece of scrap drywall and filled a bowl with water. I put the drywall over the bowl of water, this gave me a reading that was less than 1% and still didn't register on the moisture indicator. This had me thinking maybe a 5% reading is bad. But, I am willing to try anything before I tear into the drywall to find out there is no moisture. Next, I poured a small pool of water on the floor and laid the drywall right on top of it. With the meter on the drywall which is sitting on the pool of water, it gave me a 6% reading but still didn't register on the moisture indicator. Again, now I am really starting to think I may be tearing into some walls. At this point my drywall is wet and I need to clean up the water I dumped on the floor. I soaked the water up with the drywall piece then tested it again. I put the moisture meter directly on the part that was in the water. It now showed 25% and 2 green bars on the moisture indicator. I didn't let the drywall really soak up the water and it read at 25%. I now see that a low reading isn't really detecting any water damage maybe just a little bit of moisture. At 25% there is definitely some moisture or water. I would recommend this to anyone who thinks they may have a water leak prior to cutting into the floor or drywall. Feel free to check out my video.

I’ve been using this Klein moisture meter for checking drywall and wood around the house, and it’s been spot on. It’s simple to use — just place it flat and the reading shows up instantly on the bright display. I like that it scans without leaving pinholes, and it feels sturdy but lightweight in hand. The detection is accurate enough for quick checks, though it does better on flat surfaces than corners. For homeowners or anyone doing inspections, this is a reliable tool that saves time and gives peace of mind.

Works great. Quality is good. Feels solid. Should last for years to come

We have a tub that seems to be leaking somewhere. We bought this to localize the water and monitor the dry out. Super simple to work and I am pleased to have purchased the Klein version.

This saved me a lot of time and money locating the exact places on an old plaster & lath wall that were wet. It indicated the EXACT boundary of the wet area. I only had to replace those areas testing wet and it eliminated any other areas. The tester worked well if held FLAT against the wall. Of course the % moisture indication could not be verified, but in my case all I needed to know was the boundry between 100% and 0% moisture. This measurement was repeatable, allowing me to mark the boundary. It was a VERY difficult problem to solve. I initially searched for leaking pipes, a roof leak, etc. I finally decided that a calcium chloride desiccant bag that had been hanging near the closet wall must have sprung a leak. This contaminated area absorbed moisture to a point of equilibrium and remained wet regardless of running a dehumidifier for weeks. NOTE: Never use a desiccant container containing calcium chloride where a leak could splll on any absorbent surface. It will NEVER dry out and can not be cleaned off.

Seems to be a great moisture meter. I believe it's accurate and the readings are consistent. Before and after planing shows a difference of .4% which proves this meter was worth the money. It also works great for other materials. Would recommend.

Excelentes productos, solo que la pilas incluidas no sirven tienes que comprar nuevas pilas desde el primer uso o te vas a quedar sin pila en el primer uso en campo.

Works as advertised. Comparing this with a pinned model (half the price) that a neighbour borrowed and never returned Pros: - Multiple modes for different materials - Easy to use - Accurate, clear readings - Pinless Cons: - Uses 9V battery - Price (even on sale)

Habe ich gekauft für mein Wohnmobil und damit Feuchtigkeit am großen Panoramafenster (Dichtung) entdeckt, von Werkstatt bestätigt. Bisschen teuer, aber wahrscheinlich seinen Preis wert.

I don't know how this tool works, but it's magic. It is very easy to use and causes no damage to the surface being tested. The hardest part of using this tool is finding a flat surface that fits the entire unit. Most of the time that's not a big deal because floors, walls, wooden boards etc. are pretty flat. My challenge was with crown mouldings. The sensor is a small patch on the back of the meter, but to get the sensor to lie flat on the wall you need the entire unit to lie flat. Fortunately this is easier to use than a stud sensor because you just need to find some orientation that gets a portion of the sensor into contact with your surface of interest. In addition, you can see the readout change as you approach the surface so you can tell how well you are doing. Measuring the moisture level of a dry area helps to determine if you are getting good enough contact to the region of interest. For my need this was much better than a pin type meter because it did not drive any holes or pinpricks into the surface of my walls. Because it causes no damage I was able to test many areas to determine what dry was before getting to the area of concern. I definitely would not have done that if it meant putting little holes into the wall.