Fido Gasket

Fits perfect and works like a charm!

Will second whomever reviewed that these are the ones you are looking for for use on that old Italian jar you just thrifted. Old ring was cracking measured 3.75" around, but this product replaced it flawlessly. Also this looks, feels, and behaves like thick-ish rubber, not silicone, if that's what you're looking for. Great seal. Fits several large sizes.

I needed one of these for an older clamp-style Fido glass cannister where the rubber gasket had yellowed. I measured the gasket I had and it seemed to match the measurements given on the write-up. But the cannister I had was about 15 years old so I was unsure when I received these and it looked a bit too small. But with a bit of push, it fits perfectly and will seal beautifully. Makes sense it should be snug. Not sure what I'll do with the rest of the same size gaskets in the pack but I guess I'm set for life on this cannister. So, you know, one less thing.

I found some old glass jars with lids at my Mother's house. The old rubber gaskets needed to be replaced, but when I looked online there was some confusion as to what size to buy. I really wanted the rubber type of gasket as they are thicker than some of the new silicone canning rings out on the market. These gaskets or canning rings were perfect for my jars. I took some pictures with measurements to help others that are trying to figure out if these may fit their jars. These Bormioli Rocco replacement gaskets fit really well. I had to tug on the gasket just a bit to get it on the lid of the jar, but I didn't have to pull hard nor was it difficult to put on. I like that it stretched just a bit to form a tight seal around the glass lid. I am very very pleased with these and would buy them again. They formed a watertight seal when the lid is closed and clamped down. I hope the pictures help you decide if you can buy these too.

I have quite a few glass storage jars whose mouths are slightly larger than the newer crop, and have had difficulty finding replacement gaskets, a task made more difficult by inconsistent labeling information by vendors at Amazon. After extensive research, I bought these gaskets thinking they would fit my jars whose original (aged) gaskets have the following dimensions: gasket outside diameter - 4" (100 mm) gasket inside diameter - 2-7/8" (73 mm) jar width to center of opening - 3-1/2" (85mm) When I received them, I discovered the dimensions for these gaskets are: outside diameter - 3 1/2" (90 mm) inside diameter - 2 7/16" (62 mm) I almost sent them back. The only reason I didn't was that I was unable to find the "right" size anywhere. I tried one on a jar, and was pleasantly surprised. These Bormioli seals are made from high quality slightly elastic rubber that easily stretched to the larger opening. They are dense, but not as hard and inflexible as the orange seals or lower quality white seals. They are also the proper thickness, unlike some of the other thinner seals sold here. It took a bit of maneuvering to get them on (three hands would help), but its not stressing the product, and once installed they are held securely on the jar but still allow for some adjustment. Do NOT buy the 4 1/4" seals (outside dimension)thinking it's your next best option. They will fall off every time you open the jar and drive you crazy. You want a bit of stretch to hold the seals onto the lid, and I suspect the quality of this product means they will survive the elements a bit longer than the original set. I tested for water tightness and the clean white color is a big plus for me. I hope this helps others avoid the same frustrations I went through. BTW, the important dimension that everyone seems to forget is the glass ring in the lid, which is what the gasket will fit to. That dimension is 3" on my jars. You want the inside dimension of the gasket to be smaller than that size so the rubber stretches enough to hold the gaskets in place. Unfortunately, manufacturers don't include that dimension anywhere in their product information. •••••••••••••••••••••••••••••••••••• May, 2017 - 5 years later, none of these gaskets have deteriorated or hardened. They are all still just like new, with no stains or cracking. They are much better quality that the old red gaskets they replaced.

I thought they were clear but are white. Fit well.

Good replacements.

Took a shot in the dark because all the gaskets I bought for an old jar I had were too big or too small. Although these seem to be smaller than the 2.5 inch I needed ( which is not around anywhere) I made this 2 and 1/16 of an inch opening stretch out to fit.... don't want to say that's what anyone can do, just what I did and it fit! Wow!, it only took a month :) but I found one... or rather I bought 6 to get the one... very happy.. As the apostle Paul said.. know how to be abased and know what it is to abound (close to that..).... I can say AMEN!

Also dafür das Sie zu den Fido Gläsern kompatibel sein sollen sind sie immer noch deutlich zu groß. Wenn man etwas aufpasst bekommt man die Gläser (vermutlich) dicht. Ich werde aber wohl nochmal Original Dichtungen kaufen da diese einfach sauber sitzen.

Le quedan exactos, son ideales para los frascos de la línea Fido. los frascos con lavarlos y cambiarles el anillo ya parecen nuevos. Los anteriores ya estaban bastante cuarteados y gastados ya llevo varios meses con ellos y siguen como nuevos.

O anel é de boa qualidade e atendeu perfeitamente nossa necessidade.

It was okay.

Good quality