3Dman 15A 250V Rocker Switch On/Off Power Socket Inlet Module Plug 10A Fuse Switch with 18 AWG Wiring 3 Pin - 2pcs

This has now made my life easier, how you ask? It allowed me to repair my Ultrasonic Cleaner that I now use almost daily when cleaning carburetors out. Perfect fit and easy to install.

This all in one iec socket with power switch and fuce is awesome for the price , even had the wiring pre attached. Would make for an economic on off switch for a make people talk interrogation tool 🤪

It was easy for me to connect and that is saying a lot

The "old" picture has the wires labeled with "L" and "N" - this is the same with the "new" ones I got with pre-made wires. The labels are also underneath the attached spade lugs, so you actually have to pull the wires off to see the "L" and "N", which are fairly small inside the indent. I'd recommend you get a voltmeter out and see which wire's actually attached to the fuse. A 3D print (PLA) with a square hole of 28mm x 47mm worked well, if a tiny bit tight; holes are 20mm from center (on center), 3.1mm dia. YMMV. The units seem very nice (good tactile switch) other than wacky wire color choices. I haven't gotten any usage on them yet.

I bought this socket for my arcade cabinet. Unlike other products where I have to connect wires between the switch and power myself, this one already has the wiring set up inside the plastic component, which is very convenient. I only need to connect the wires for the power, making installation much easier. However, the included wires couldn’t be directly connected to my outlet, so I used pre-made ones instead. The labels "L" and "N" indicate which side is Load and Neutral, while Earth is represented by a symbol.

Works great. Ordered for a Costway SureFit treadmill. The power switch went out. Ordered this one. Hooked up easily and powered on as it should.

Works great good value

It's fine. I have "New Version" shown in picture, The switch opens and closes both the neutral and line wires, leaving the ground alone. Check the wires so you know which is neutral. Mine was wired so that the blue wire (middle terminal on inside) was wired to the hot/line side of my normal NEMA 5-15 to C14 cord. I recommend checking yours carefully with a multimeter.

If I hadn't been able to find this switch to repair my ultrasonic cleaner I would of had to thrown it away and purchase a new on. This saved me allot of money being able to repair it instead. I hope it last longer then the original switch, but it is not expense and easy to change.

Fonctionnent parfaitement, faciles à installer et de bonne qualité. Idéals pour des petits montages électriques ou des réparations, ils remplissent bien leur rôle

Perfecto en todos los sentidos, y que todas las conexiones estén ya hechasy tengas solo 3 cables a la vista es lo mejor, bien aislados, viene con el fusible y es de muy buena calidad, antes tendría que haberlo comprado!

230V aansluiting van een spectrum analyser

Se costasse almeno la metà sarebbe perfetto ma per chi come me non esperto di cablaggi vali i soldi spesi. Lo usato collegando una ciabatta x un cabinato arcade fai da te. Perfetto e funzionante.