PlastX Clear Plastic Cleaner & Polish

What Works Really Well Restores Clarity This polish is designed to restore optical clarity to both rigid and flexible clear plastics. Meguiar’s says it removes cloudiness, fine scratches, oxidation, and chemical haze. Meguiar's +2 Meguiar's Latvia +2 Long‑Lasting Protection It contains water‑resistant polymers that help protect the plastic after polishing. Meguiar's Latvia Safe Formula According to Meguiar’s technical sheet, the product doesn’t use harsh solvents and is non-toxic. Meguiar's Latvia Versatile Use Works on many clear plastic surfaces: headlights, convertible windows, Plexiglass, motorcycle windshields, and more. limora.com User Feedback — Very Positive Many users say it brought their cloudy or yellowed headlight lenses back to a clear, “like-new” state. eBay On detailed parts like gauge clusters or smaller clear plastics, people note that with enough polish and elbow grease, it really works. opentip.com Things to Be Careful About / Potential Drawbacks Requires Effort: Because it’s a “cutting” polish (uses microscopic abrasives), you’ll need to rub it well. Applying by hand is fine, but some users say it takes time or even a drill or polishing pad to get the best results. AisleGopher +1 Not Magic on Severe Damage: On very deep scratches or heavy oxidation, it may not fully restore the plastic. Some detailers suggest sanding first before using PlastX for the best outcome. Reddit Temporary Results Without Protection: Several users note that polished plastic (like headlights) can haze again over time if not sealed or coated after polishing. Reddit Application Sensitivity: On some plastics, if not applied and removed correctly, it may leave residue or “streaks.” Reddit Best For Car owners who want to restore foggy or oxidized headlight lenses without replacing them. Motorcyclists or boat owners with clear plastic windscreens or windows. Anyone with scratched or dull plastic parts (like gauge clusters, clear trim) who wants to bring back clarity. Bottom Line: Meguiar’s PlastX is a very capable and trusted plastic polish. It’s especially strong for headlight restoration or any clear plastic that’s lost its transparency. It’s not “set it and forget it” — you’ll need to apply it well, but when done right, the results are very satisfying. For long-lasting clarity, consider following up with a sealant or UV protective coating.

This polish has always worked well for its intended purpose for me but it has also proven to be outstanding for other purposes. Please see the attached photos of a 1950s Stanley router that looks like new thanks to this polish. I've also made my 20 year year old porcelain bathroom sinks look new. I just finished giving a knife a mirror finish with this polish. Just thought I'd pass that along hoping it might prove helpful!

Cleaned it very well and easy to use as well and my headlights look brand new and very effective and clear

This stuff works really well and you can see the results right away. Great price, color and great quality that can last for lots of projects. Super smooth, great bottle size, smell good, and easy to use.

I bought an audio video receiver at a good deal for open box with a scuffed display. It looked like someone had tried to buff out a scratch only to leave a larger area scuffed. I couldn’t find my Novis acrylic polish but read about this. I used a small amount on a microfiber cloth and hand polished the scuff on the acrylic display for about 10 seconds in a circular random motion, and then wiped off the residue with a clean part of the cloth. The scuffed area is dramatically improved and looks great. You would never know there was a scuffed area! See photos for before and after. Great value.

Mcguire used to have a two part system for cleaning clear plastic it worked much better. Although this one works ok, it just doesn't work as good. Just like anything these days , let's make it cheaper. I mean, it's a better price then the 2 part A and B bottles, if I remember right it was more expensive , but you get what you pay for and when you're trying to make something look better , I'd rather spend a little more money and have it work better. So I hope mr. McGuire's if you read this , just make the 2 part system again!

Works Great easy application on 20 yr old head lights & taillights product made a huge difference even my wife noticed something was different I recommend 5 🌟

Bought a used car which had scratches on plastic surface next to the shifter. Worked so well! Removed all the scratches and left a nice shiny surface.

What can I say, at INR 2000 this is not a small investment. But when you have car OCD, you gotta do it. Meguiar's is a trusted brand they say, and I trust it now. Although, you have to follow the instructions and your arm is gonna complain for a good 30 minutes after you are done. Great quality, easy to clean, and can be used on other clear plastic surfaceds, so versatile. The product is gooey and thick, don't dilute it for best results. Microfiber: AmazonBasics Car: Skoda Rapid

A marca fala por si só. Produto excelente, marca conceituada, qualidade alta.

Gör sitt jobb

Ca reste cher mais top pour rénover des plastics brillant comme les phares (avant ou arrière-). Ca aide sur les bulles moto, mais perso j'ai du mal à obtenir un beau résultat impeccable comme sur des phares avant (les bulles sont trop fragiles). A utiliser avec une très bonne microfibre sans pression pour des résultats de correction subtils (black piano, micro rayures...) ou avec un mousse de polysage sur machine rotative c'est mieux pour un phare par exemple

Mein Astra-G ist nun 15 Jahre und 5 Monate alt. Er stand den Arbeitstag immer im Carport und ansonsten unter freiem Himmel, aber mit der Front gegen eine Hauswand. Durch die Witterung und Pollen sind beide Scheinwerfer ziemlich grün geworden. Ein Austausch der Scheinwerfer ist eine Heidenarbeit. Nicht mehr wie früher: Vier Ecken, vier Schrauben und raus ist das Teil. Nein, man muss die Stoßstange ausbauen und um die auszubauen, muss man die Kotflügel demontieren. So greift Eins ins Andere ... ... So also habe ich mir diese Politur bestellt. Ich kenne solche Produkte ja von früher, als man Handydisplays noch polieren konnte, wenn da mal ein Kratzer drin war. Zuerst habe ich mit einem Schwamm von Hand poliert und mit einem Microfasertuch die Rückstände abgewischt. Das Ergebnis war, dass die grüne Patina zum Teil wegging. Aha, es scheint also zu klappen! Dann habe ich mit dem Microfasertuch poliert und das Ergebnis war schon ganz gut. Die grüne Patina ging vollständig weg. Aber es blieben noch einige "Wolken" von Kratzern übrig, die sich schnell auch wieder mit Schmutz zugesetzt haben. Jetzt musste "rohe Gewalt" her, in Form des BOSCH DIY Polierschwammes http://www.amazon.de/gp/product/B0053PVU9W/ref=cm_cr_ryp_prd_ttl_sol_1 Den in den Akkuschrauber eingespannt und eine Akkuladung pro Scheinwerfer poliert. Dabei hat sich der Kunststoff merklich erwärmt. Daher weiß ich, dass diese Behandlung jetzt genau richtig funktioniert. Das Geheimnis einer guten Politur ist die Wärmeentwicklung, die das Material von den "Gipfeln" abschmilzt und in die "Täler" einbringt. Ergebnis: Beide Scheinwerfer vom Astra sehen nun wieder aus, wie neu. Sämtliche Kratzer und Mikrokratzer sind verschwunden. So denke ich, dass das Ergebnis auch langlebig sein wird. Es ist einfach nichts mehr da, in dem sich die Pollen festsetzen können. Das Acrylglas, welches ich zuvor noch als "Kunststoff" bezeichnet hatte, ist nun wieder so durchsichtig wie Glas. Wenn man mit der Hand über das Acrylglas streicht, hat man das gute Gefühl, dass es nun glatt geworden ist! FAZIT: Diese Politur, einen Polierschwamm für die Maschine und Geduld. Dann wird das was mit den Scheinwerfern. Nur dran denken, dass beim Polieren immer Material abgetragen wird. Irgendwann ist auch der dickste Kunststoff "wegpoliert".