Onlyfire 12 Inch Square Fire Pit Burner Pan with Square Burner Ring – 304 Stainless Steel Drop-in Gas Fire Pit Insert for Natural Gas & Propane, 88,000 BTU, Square Flame Pattern for DIY Fire Table

Used this to replace a rusted out insert on my old Rona-purchased outdoor gas fireplace. Needed a bit of modification but cost about 33% of the price of a replacement burner.

The table we purchased for our deck has a square lift out section in the middle that is perfect for this burner. It is a little smaller than the hole so it was necessary to add stainless steel strips around the edge to hold up the burner. Add fire glass and glass windscreen and it is very nice to sit with a glass of wine and toast marshmallows very carefully. (gas is not as marshmallow friendly as those glowing campfire coals.) Unfortunately the control on the propane hose to the tank is VERY touchy (not part of the fire pit package although it was suggested on Amazon when purchasing the fire pit) The control will need to be replaced / upgraded for safety.

Prêt à instaler

Works exactly as you'd expect and was simple to install. I bought 18 pounds of fire rock, and had about 3 pounds left over, so 15 pounds should do it. Also, the recommended 1/2" propane adapter fitting does connect to the fitting on this fire pit, but it will NOT fit the hose they recommend. You will need a 3/8" male flare to 1/2" female "reducing" fitting to get the hose to connect to the propane fitting. I wish Amazon had told me this, I needed to run to the hardware store for that fitting. I would also recommend an ignitor. This works fine with a lighter, but an ignitor would be handy and they are cheap.